F&F AT-1I-DS Manual

AT-1I-DS
Temperature transducer
with current output
Do not dispose of this device in the trash along with other waste!
According to the Law on Waste, electro coming from households free of charge and can
give any amount to up to that end point of collec� on, as well as to store the occasion of
the purchase of new equipment (in accordance with the principle of old-for-new, regard-
less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the
environment and human health.
Purpose
The AT-1I-DS temperature transducer has been designed for
temperature measurement using the DS1820 series digital tem-
perature sensor and converting measurement result into an ana-
log current signal in the range of 4÷20 mA.
Features
» Continuous measurement of ambient temperature using digi-
tal temperature sensors DS1820, DS18S20 and DS18B20 (sen-
sor to be purchased separately);
» Compatible with the RT4 temperature sensors (temperature
range -30÷65°C) manufactured by F&F;
» Adjustable measuring range;
» Optical indication of the operation of the transducer and the
state of the connected sensor.
F&F Filipowski L.P.
Konstantynowska 79/81, 95-200 Pabianice, POLAND
phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71
www.fif.com.pl; e-mail: biuro@fif.com.pl
- 1 -