Camsat iCAM-MiniHD Quick Start Manual

MADE IN
POLAND
www.camsat-cctv.com
Starting at the destination point
The iCAM-MiniHD system with the IP camera should be mounted only for permanent, stable
construction of walls and masts. The holder should be mounted vertically, the handle/padlock must be
at the bottom. Additionally, you should install steel safety cable to a separate anchors or any other part
of the pole. Safety cable must be mounted to a solid, robust construction, which will guarantee the device
with the camera will be held in case of an emergency. The installer is responsible for correct camera
installation in accordance with these instructions and safety standards!
Slide the camera (antenna up) into the holder, and then attach the safety cable and padlock to secure the
camera or twist two caps on the bolts to prevent unauthorized assembly.
iCAM-MiniHD starts to record the image, and full remote access to the device will be possible.
Technical support / Service:
Producer:
serwis@camsat.com
CAMSAT Gralak Przemysław
Ogrodowa 2a +48 52 387 36 58
(ext. 25 and 26)
86-050 Solec Kujawski
Poland
TECHNICAL
SUPPORT
camsat@camsat.com
Mon–Fr 8.00 AM–4.00 PM
tel.+48 52 387 36 58
+48 52 387 10 97
+48 52 387 36 58
+48 52 387 54 66
Full instructions available on www.camsat-cctv.com
EU EU
Sales:
camsat@camsat.com
+48 52 387 10 97
(ext. 21 and 22)
Mon.-Fri. from 8.00 to 16.00
European websites:
www.camsat.com
www.camsat-cctv.com
TECHNICAL
SUPPORT
Mon–Fr 8.00 AM–4.00 PM
tel.+48 52 387 36 58
Mobile monitoring system with LTE module
Basic information
The iCAM-MiniHD device is a observation system designed for mobile monitoring of in places that are
particularly difficult to secure due to unfavorable conditions.
It enables very fast installation of the device on the site without complicated installations and projects.
The integrated LTE wireless module with two SIM card sockets allows you to view the image from
the camera from any place in the world and provides connection with therecorder in your office or
server room.
Package content
• iCAM-MiniHD
• LTE Antenna x2pcs
• PoE 48V power adapter
• Quick-connector mounting socket + mounting accessories
• Steel safety cable
• Quick Start User Manual and CE Declaration
Full instructions available on www.camsat-cctv.com
MINI
QUICK START
ver. 1.1
powered from PoE 48V
compatible with any IP camera