American Retro AR-15002 Operating Instructions

American Retro AR-15002 Operating Instructions

Coca-cola machine

Advertisement

Quick Links

IMPROPER INSTALLATION, ADJUSTMENTS, ALTERATIONS, SERVICE OR
MAINTENANCE CAN CAUSE INJURY OR PROPERTY DAMAGE. REFER TO THIS
GUIDE. FOR ASSISTANCE OR ADDITIONAL INFORMATION CONSULT A
QUALIFIED INSTALLER OR SERVICE AGENCY
DO NOT OPERATE THE MACHINE WITH THE SIDE SCREENS OFF. ALWAYS
UNPLUG THE MACHINE PRIOR TO REMOVING THE SIDE SCREENS. KEEP
CHILDREN AWAY FROM THE MACHINE WHEN SIDE SCREENS ARE REMOVED.
NEVER PLACE YOU HAND OR TOOLS INTO THE REFRIGERATION
COMPARTMENT WHEN THE MACHINE IS RUNNING. ALWAYS USE A
GROUNDED THREE-PRONG RECEPTACLE. DO NOT STORE OR USE GASOLINE
OR OTHER FLAMMABLE VAPORS AND LIQUIDS IN THE VICINITY OF THIS OR
BEFORE PLUGGING THE MACHINE IN
READ ALL THE INSTRUCTIONS AND LET THE MACHINE STAND UPRIGHT FOR
A MINIMUM OF 24 HOURS PRIOR TO PLUGGING IT IN. THIS ALLOWS ALL THE
Congratulations on purchasing your Coca-Cola Machine. Please read these instructions
prior to operating your machine.
MODEL: AR-15002
COCA-COLA MACHINE
OPERATION BY 120V AC
OPERATING INSTRUCTIONS
WARNING
FOR YOUR SAFETY
ANY OTHER APPLIANCE
LUBRICANTS TO SETTLE PROPERLY.
.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AR-15002 and is the answer not in the manual?

Questions and answers

Summary of Contents for American Retro AR-15002

  • Page 1 A MINIMUM OF 24 HOURS PRIOR TO PLUGGING IT IN. THIS ALLOWS ALL THE LUBRICANTS TO SETTLE PROPERLY. Congratulations on purchasing your Coca-Cola Machine. Please read these instructions prior to operating your machine. MODEL: AR-15002 COCA-COLA MACHINE OPERATION BY 120V AC WARNING...
  • Page 2 The unit must be electrically grounded in accordance with the National Electric Code ANSI/NFPA 70-(latest edition) when installed if an external alternating current electrical source is utilized. The installation must confirm with any applicable local code. 120 VOLT AC ELECTRICAL CONNECTION: This unit is equipped with a three-prong (grounded) plug for protection against shock hazards, and should be plugged directly into a properly grounded three-prong receptacle.
  • Page 3 LEVELING: Prior to operating, it is important to level this unit. You can level this unit by increasing or decreasing the height of the wheels. This can be done by raising or lowering the support nut on each wheel. DEFROSTING: If it becomes necessary to defrost this unit, take out any food, beverages, etc. from the internal compartment.

Table of Contents

Save PDF