Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for JOSEF DAVIDSSONS Heimdall 790
Summary of Contents for JOSEF DAVIDSSONS Heimdall 790
- Page 1 Heimdall 790 Manual for preparation, installation, operation and maintenance.
-
Page 2: Warranty
Josef Davidssons AB Heimdall 790 Warranty Josef Davidssons AB is responsible for the product being manufactured without faults. The warranty covers all parts of the stove and is valid from the date of delivery to the customer. warranty period for grates, vermiculite sheets and glass in the fireplace and oven doors is 1 year. -
Page 3: Before You Start
What comes with the wood-burning stove? MANUAL SOOT RAKE A guide to installation, use and care For cleaning the fireplace. of your wood-burning stove. ALLEN KEY For adjusting the height of the stove SEALANT Sealant for connection to the chimney. STOVE HOOK This stove hook can also be used to adjust the flue gas ASH BOX... -
Page 4: Installation
Installation PREPARATIONS DISTANCE NEXT TO THE STOVE Always contact a certified chimney sweep if you are Make sure that there is an air gap of at least 5 mm on unsure about where your stove should go and how to both sides of the stove. - Page 5 Important measurements Fire rated material behind the stove must Minimum distance from reach at least 1 100 mm above the stove combustible material and 200 mm on each side of the stove. above the stove: 1 100 mm 5-10mm 5-10mm Fire rated material 200 mm 5–10mm...
-
Page 6: Connection To The Chimney
Connection to the chimney CONNECTION The flue has to be able to be swept along its entire length, The chimney must be of type T400. The diameter of the and the soot hatches have to be easy to access. connection socket measures 120 mm on the outside, for Check that the chimney is sealed and that there are no both back and top connections. -
Page 7: Mechanical Ventilation
Connection to outside air MECHANICAL VENTILATION CONNECTION TYPES A lot of houses built in recent years have mechanical There are different ways to connect outdoor air to your ventilation. This then affects the chimney’s ability to create wood-burning stove depending on the type of house negative pressure in the fireplace and can lead to impaired you have. - Page 8 BUTTERFLY VALVE Open the door carefully to avoid smoke. Spread the The Heimdall 790 is equipped with a butterfly valve. ash and embers into an even bed. Fill with wood and With the valve open, the path of the flue gases is as leave the fireplace door open for a while until the fire short as possible and the draft in the stove is maximised.
- Page 9 MADE IN SWEDEN with a lever at the rear edge screws that are easily Heimdall 790 is manufactured on the top of the hob. accessible from the top. at AB Josef Davidsson’s factory in Reftele, Småland.
- Page 10 Dimensions and technology Height (850)/880–920mm Fireplace dimensions 200x200x380 mm Width 790 mm Density class Depth 600 mm Nominal power 5,7 kW Weight 160 kg Flue gas temperature 180°C Flue gas temp. in flue gas connector 216°C Minimum chimney draft -10 Pa Flue gas flow 8 g/sek...
-
Page 11: Maintenance
THE STEEL HOB Clear the grate of ash regularly and empty the ash box The Heimdall 790 is equipped as standard from the when it gets full. Keep the fireplace and flue pipes clean. factory with a stainless Corten steel hob. If you keep the... - Page 12 Jättevägen 1, 333 75 Reftele, Sweden Manual Heimdall 790 2024-03-05 www.josefdavidssons.se...
Need help?
Do you have a question about the Heimdall 790 and is the answer not in the manual?
Questions and answers