CReel 2.0 CM Quick Start Manual

Model: 2.0 CM
Cable Management System
Included parts
CReel 2.0
CReel 2.0 wall bracket
Long bolt with nut
Short bolt with nut
Safety locker with keys
Wall standard plugs and screws 4
Washers
Wall connector holder
Wall plugs and screws
Drilling templates
Necessary tools
(not included)
Drill
Drill bits (10mm and 6mm)
Wrench
Download full manual
Quick Start guide
1
Choose the right place to install the CReel 2.0 taking into account the length of the connector cable to
the wallbox (preferably in the absence of rain and direct sun).
Use included template (or print out from downloaded manual) to drill 4 holes for CReel 2.0 wall
bracket. It is recommended to install the bracket at a height of 170 cm above the ground or between
90 cm and 110 cm for wheelchair users.
Attach the CReel 2.0 bracket with the 4 dowels provided (if they are appropriate for your wall or use
ones appropriate for your wall material)
Qty
1
1
1
1
1
4
1
2
Hang the CReel 2.0 on its bracket with the long bolt. Secure the installation with the short bolt in one
hole and the padlock in the other one.
4
2
bubble level reference
1 cm
50 mm
1 cm
Ø 8 mm
61 mm
90 mm