Serialio BlueSnap DB9-M6A Quick Start Manual page 2

Doc Rev 20240418-C
To change the 8 character wireless discovery name of the BlueSnap use the command 'set sy d n
<name>', and tap SEND, verify success reply.
To use discovery name that has 3-character value, and maintain the last 4 digits in the wireless MAC
address, use the command 'set sy d n <val>-####' e.g. 'set sy d n DB9-####', then send command Save,
and power cycle. IMPORTANT NOTE: changing the discovery name may affect how apps work like
® ® ®
SerialMagic Keys, iScanBrowser, Cloud-In-Hand Mobile Grid, Cloud-In-Hand , Cloud-In-Hand , Stratus-
io Time & Attendance, and apps made with the Serialio.com SDM libraries.
Battery version of the M6A will power off after a few minutes with no wireless connection to a host.
To set the time for this power off feature, use command 'set sy a t <seconds>'
For example to have device power off after 5 minutes of no connection, use the command 'set sy a t
3000'. To disable this power off timeout, set the seconds value to 0.
This example will show sending data wirelessly from RS-232 serial port to BlueSnap using the
SerialMagic Keys Professional app on Windows, and yACK FAST app Android.
Copyright 2019-2024 Serialio.com