Advertisement
Quick Links
Bluesnap M6A LEDs
Bluesnap M6A Wireless RS-232 Adaptor LED Indicators
Operations
Power Cycle
Reset
BLE Pairing
LED Colors
Power LEDs
Edge LEDs
Green LED
Blue LED
Red LED
Power Cycle
The green LED will begin to blink rapidly when the power button is held down. When the green LED
stops blinking, release the power button to power off the Bluesnap M6A.
Operations
1
1
2
2
2
2
3
3
3
3
1
Advertisement
Summary of Contents for Serialio Bluesnap M6A
- Page 1 3 3 Red LED Operations Power Cycle The green LED will begin to blink rapidly when the power button is held down. When the green LED stops blinking, release the power button to power off the Bluesnap M6A.
- Page 2 Reset To reset the Bluesnap M6A, The reset process takes about a minute. Continue holding down the power button during power on. For the always-on version, press-and-hold the button then apply power. The reset process takes about a minute. After about 1 2 seconds the red LED next to the blinking blue LED will blink alternately with the green LED.
- Page 3 Edge LEDs There are three LEDs located near the edge of the device; a green LED, a blue LED, and a red LED. Green LED Blue LED Red LED Wireless connection Solid Data transfer via No wireless connection Blinking Low battery wireless connection The green LED blinks when the power button is held down (when it...
Need help?
Do you have a question about the Bluesnap M6A and is the answer not in the manual?
Questions and answers