Operating Modes; Timer Function - Danby DAC180EB3WDB Owner's Manual

OPERATING INSTRUCTIONS

OPERATING MODES

There are four operating modes to choose from.
Press the Mode Button repeatedly to choose the
desired mode. The adjacent indicator light will
illuminate to show which mode has been selected.
• Cool Mode
Choose cool mode to set the cooling function.
Use the temperature control buttons to choose the
desired temperature. When cool mode is selected,
the fan speed can be adjusted by pressing the fan
button.
• Dry Mode
Choose dry mode to remove excess moisture
from the air during periods of high humidity. All
water pulled from the air will condense inside the
appliance and drain out the back. The fan speed
will be automatically set and cannot be modified in
dry mode.
• Fan Mode
Choose fan mode to run the internal fan without
engaging the cooling function. Press the fan button
repeatedly to choose the fan speed: low, med, high
or auto.
• Auto Mode
Auto mode is a pre-set factory program that
automatically defines the mode (cool or dry)
and fan speed based on the set temperature, the
ambient temperature and the ambient humidity.
TEMPERATURE CONTROL BUTTONS
The Temperature Control Buttons will modify the set
temperature in 1° increments.
The temperature control buttons will modify the set
time of the timer function in 0.5 hour increments up
to 10 hours and then in 1 hour increments up to 24
hours maximum.

TIMER FUNCTION

The Timer Function can be used to turn the
appliance on or off after a set period of time.
Auto On Function
1. Press the Timer Button once and the Auto On
indicator light will illuminate.
2. Use the Temperature Control Buttons to select
the desired amount of time before the appliance
should turn on.
3. Use the Mode Button to select the desired mode.
4. Use the Fan Button to select the desired fan
speed.
5. The time selected will appear on the display
panel and will count down until the appliance
turns on.
Auto Off Function
1. Press the Timer Button twice and the Auto Off
indicator light will illuminate.
2. Use the Temperature Control Buttons to select
the desired amount of time before the appliance
should turn off.
3. The time selected will appear on the display
panel and will count down until the appliance
turns off.
Using Auto On and Auto Off
Simultaneously
If there is a need for the appliance to turn on, run
for a set period of time and then turn off, the Auto
On and Auto Off functions can be used at the same
time by first setting one and then the other. Both
indicator lights will illuminate and the display will
count down to the appliance either turning off or
on, whichever function was set first.
Note: The timer will not cycle the appliance on and
off indefinitely. The Auto On and Auto Off timers
will function one time and then the appliance will
return to regular functioning.
Turning the appliance off, pressing the default
button on the remote or unplugging the appliance
will clear all memory settings, including the timer.
21