Advertisement
Quick Links
Installation guide for M1622/M1623
Appreciated to choose M1622/M1623 2.4GHz wireless
PC mouse as your favorite which integrates its wireless signal receiver
right in the same compact case. So the user can maintain and carry a
full-functional mouse more easily.
M1622/M1623 can provide up to 8 to 10 meters distance for operation
however it's generally less than one meter for normal usage with your
personal computer. On the left side of M1622/M1623. There is one
"page-up" and one "page-down" button. Hence the user can surf the
internet web pages more handful. Besides, the user can press a button
right on the middle location of a mouse upside to switch the mouse CPI
from 800 to 1200 or vise versa to make sure the mouse can be applied
and fit into different applications.
1. Descriptions:
There are total six buttons on M1622/M1623----Left, Middle, Right,
Page-Up, Page-Down and CPI Switch.
2. Process to Operate:
2-1. Take off the battery cover from the bottom of M1622/M1623.
2-2. Put in two AAA batteries with proper + and – positions first. Then
put the battery cover back and press it tight. CPI Switch Middle button
Advertisement
Summary of Contents for Accesstek M1622
- Page 1 So the user can maintain and carry a full-functional mouse more easily. M1622/M1623 can provide up to 8 to 10 meters distance for operation however it’s generally less than one meter for normal usage with your personal computer.
- Page 2 Scroll Wheel Right Button Left Button Page-Down Button Page-Up Button Battery Cover 2-3. Switch on then you can see the LED lights. The M1622/M1623 is thus working now. 2-4. Pull out the wireless receiver which is hidden on the bottom of M1622/M1623.
- Page 3 M1622 and M1623 are the same. 2. Any change to the specifications mentioned above will be subjected to without any forms of prior notice. FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference.
- Page 4 reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. ...
Need help?
Do you have a question about the M1622 and is the answer not in the manual?
Questions and answers