Rapid Charge Mode; Recover Full Battery Capacity; Power Settings; Os Power Mode - Lenovo Legion Go User Manual

Battery charging is affected by its temperature. The recommended temperature range for charging the
battery is between 10°C (50°F) and 35°C (95°F).
Note: To maximize the life of the battery, once the battery is fully charged, it must discharge to 94% or lower
before it is allowed to recharge again.

Rapid charge mode

The battery of the tablet is in rapid charge mode by default. The following table lists the estimated time
needed for batteries in rapid charge mode to be charged to 80% and 100% respectively.
Table 18. Estimated charge time for batteries in rapid charge mode
Mode Time needed to charge from 0% to 80%
Rapid charge Less than 1 hour
Note: The estimated charge time assumes that the battery is charged when the tablet is in sleep,
hibernation, or powered-off state.

Recover full battery capacity

If your tablet is constantly plugged in to an electrical outlet and the battery rarely discharges, the battery may
not be charged to its full capacity even if the battery meter reports 100% charge. You can recover the
battery's full charging potential simply by discharging and re-charging the battery.
Step 1. Unplug the tablet and use it until the battery charge drops below 20%.
Step 2. Plug in the tablet and charge the battery to 100%.

Power settings

You can use Windows power settings to achieve the best balance between power efficiency and
performance.

OS power mode

You can switch between power modes based on your power usage and performance needs to optimize your
console experience.
Go to Settings ➙ System ➙ Power & battery to switch between power modes. You can also switch modes
in the Performance section of the Legion Space app.
The following table lists the available power modes on your console and the recommended conditions for
each mode.
Table 19. Power modes and their recommended usage conditions
Power mode
Best performance
Balanced
Best power efficiency
22
User Guide
Recommended conditions
• Your console is plugged into an electrical outlet.
• You want the best performance.
You want to find a balance between power use and performance.
• Your console is operating on battery power.
• You want the console to save power.
Time needed to charge from 0% to 100%
Less than 2 hours