Adam Hall Gravity SP 3202 CS B Quick Installation Instructions

SP 3202 CS B
STUDIO MONITOR SPEAKER STAND WITH
SQUARE STEEL BASE
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation
and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other
information from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead
to product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal
of packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings,
please contact your local distributor.
MANUFACTURER'S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at:
https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-DECLARA-
TIONS_GRAVITY.pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Adam-Hall-Str. 1, 61267 Neu Anspach / Email Info@adamhall.com /
49 (0) 6081 / 94 19-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product,
indicates that this appliance may not be treated as household waste. This is
to avoid environmental damage or personal injury due to uncontrolled waste
disposal. Please dispose of this product separately from other waste and
have it recycled to promote sustainable economic activity.
CAUTION
BEFORE USING THE INSTALLATION, PLEASE CHECK THAT THE TRIPOD
IS IN A SECURE POSITION AND, IF NECESSARY, ALSO SECURE IT
AGAINST POSSIBLE TIPPING
Gravity is a registered brand of the Adam Hall Group
®
FEATURES
• Solid square steel base
• Steel tray with cushioning EVA pads
• Black powder coating
• 40 kg load capacity (with centric loading)
DESCRIPTION
Place your studio monitors in the right position for the best sound results!
The Gravity® SP 3202 CS B studio monitor stand has a square steel base plate
that, weighing almost 7 kg, ensures a secure stand and a rubberized handle
for easy transport. In addition, the base plate is equipped with two additional
M20 threads for eccentric mounting of the pole, which provides more flexibility
when setting it up.
For optimum speaker positioning, the stand can be easily adjusted in height from
860 mm to 1500 mm and fixed in place with an adjusting screw and a locking
pin. The speaker support measures 250 mm × 250 mm and is equipped with
EVA to protect and decouple the studio monitors for best sound performance.
SPECIFICATIONS
Product number
Product type
Type
Tube material
Steel tube colour
Tube surface
Tube diameter
Minimum height
Maximum height
Bearing surface
Height adjustment
Base type
Base material
Base measurements
Base weight
Lower connector
Centric load capacity
Uncentric load capacity
Interchangeable rings
Black ring pack included
Weight
Adam Hall GmbH | Adam-Hall-Str. 1
61267 Neu-Anspach | Germany
GSP3202CSB
Stands and Tripods
Speaker Stands
Steel
Black
Powder-coated
42 mm / 35 mm
860 mm
1500 mm
250 × 250 mm, EVA padded
Adjusting screw
Square
Steel
390 × 25 × 390 mm
6.74 kg
M20
40 kg
20 kg
1× 25 mm, 1× 30 mm
Yes
10.2 kg
Phone: +49 60 81 · 94 19-0
adamhall.com