Download Print this page
LNS WS 2 Series Maintenance Manual
LNS WS 2 Series Maintenance Manual

LNS WS 2 Series Maintenance Manual

Air filtration systems

Advertisement

Quick Links

Air Filtration Systems
Filter Maintenance Guide

Advertisement

loading

Summary of Contents for LNS WS 2 Series

  • Page 1 Air Filtration Systems Filter Maintenance Guide...
  • Page 2 PRODUCTS AIR FILTRATION SYSTEMS...
  • Page 3: Filter Maintenance

    FOX WS 2 SERIES – FILTER MAINTENANCE 1. Filter Maintenance • Clogging of the First Stage Pre-Filter and Main Stage Filter is indicated by the pressure level given by the pressure gauges, located beside the control panel. • Filter conditions can be correctly estimated by the needle position as indicated below: •...
  • Page 4 FOX WS 2 SERIES – FILTER MAINTENANCE Personal Safety – Unit Integrity • Before servicing the unit: • Press the stop button on the motor protector switch, lock out the start up button, close the protective lid and remove the keys.
  • Page 5 FOX WS 2 SERIES – FILTER MAINTENANCE 2. First Stage Pre-Filter Maintenance • Release the safety spring and open the latches • Use the provided handle to lift the Upper Cabinet, until it opens completely • Unscrew the Center Pre-Filter knob •...
  • Page 6 FOX WS 2 SERIES – FILTER MAINTENANCE 2. First Stage Pre-Filter Maintenance Personal safety Do not remove the pre-filter for any reason while the unit is on. Removing the pre-filter while the unit is on will expose you to hazards of a mechanical nature (dragging, cutting, shearing etc.) due to rotation of the impeller.
  • Page 7 FOX WS 2 SERIES – FILTER MAINTENANCE 2. First Stage Pre-Filter Maintenance: Emulsion...
  • Page 8 FOX WS 2 SERIES – FILTER MAINTENANCE 2. First Stage Pre-Filter Maintenance: Oil...
  • Page 9 FOX WS 2 SERIES – FILTER MAINTENANCE 2. First Stage Pre-Filter Maintenance • After having checked the correct positioning of each component, tighten the Outer Pre-Filter knobs • Make sure the support base on the bottom of the Pre-Filter compartment is clean and free of chips (or other foreign material) •...
  • Page 10 FOX WS 2 SERIES – FILTER MAINTENANCE 3. Main Stage Filter Maintenance Personal safety Do not remove the main filter for any reason while the unit is on. Removing the main filter while the unit is on will expose you to hazards of a mechanical nature (dragging, cutting, shearing etc.) due to rotation of the impeller.
  • Page 11 FOX WS 2 SERIES – FILTER MAINTENANCE 3. Main Stage Filter Maintenance • Remove the protective grille turning the magnetic catches or with ¼ turn • Unscrew the nut on the Main Stage Filter • Remove the Main Stage Filter Note The glass microfibre cartridge cannot be cleaned;...
  • Page 12: Hepa Filter Maintenance

    FOX WS 2 SERIES – FILTER MAINTENANCE 4. HEPA Filter Maintenance Personal safety Do not remove the HEPA filter for any reason while the unit is on. Removing the HEPA filter while the unit is on will expose you to hazards of a mechanical nature (dragging, cutting, shearing etc.) due to rotation of the impeller.
  • Page 13 FOX WS 2 SERIES – FILTER MAINTENANCE 4. HEPA Filter Maintenance • Remove the top cover • Unscrew the knobs and remove the absolute filter element • If applicable, refer to the Main Filter Maintenance Section to replace Main Filter.
  • Page 14 FOX WS 2 SERIES – FILTER MAINTENANCE 5. Ensure You Are Using The Proper Filters For The Application • Emulsion Filters • Only used for water-based coolants. • Oil Filters • Used for Oil. Can also be used for water-based coolants with high coolant concentrations and trace amounts of oil (i.e., oil-based...
  • Page 15: Main Filter

    FOX WS 2 SERIES – FILTER MAINTENANCE PREFILTER MAIN FILTER Internal filter sleeve not provided on WS170 Internal extra filter sleeve provided on 170/1020/1250 Expanded metal not Upper and lower needed gasket provided...
  • Page 16 FOX WS 2 SERIES – FILTER MAINTENANCE Additional Notes: • Wipe out the mist collector cabinet with each filter change. • Inspect inlet hose for blockage and clean out before running the mist collector again. • Inspect drain line for blockage and flush line with coolant / oil being used.
  • Page 17 FOX WS 2 SERIES – FILTER MAINTENANCE Spare Filters Parts List...
  • Page 18 THANK YOU FOR YOUR ATTENTION! Find out more on our website: www.LNS-america.com...