Summary of Contents for Geniatech DK630
- Page 1 DK630 User burning instructions V1.0 Room 02-04, 10/F, Block A, Building 8, Shenzhen International Innovation Valley, Dashi Road, Nanshan District, Shenzhen, Guangdong, China Emai: support@geniatech.com Tel: (+ 86) 755 86028588...
- Page 2 REVISION HISTORY Date Version Reason for change Personnel Remark 2022/09/23 Create document Room 02-04, 10/F, Block A, Building 8, Shenzhen International Innovation Valley, Dashi Road, Nanshan District, Shenzhen, Guangdong, China Emai: support@geniatech.com Tel: (+ 86) 755 86028588...
- Page 3 ● Burning cable with two USB male heads ● Computer (Windows 10 for example) ● DK630 (RK3566 )Board Note: If the computer cannot recognize the USB burning mode, you can install the driver and try again; If the PC burns normally, the driver installation can be ignored.
- Page 4 （2）Double-click DriverInstall.Exe -> Click Driver Installation, as shown below： If the installation is successful, click OK. Room 02-04, 10/F, Block A, Building 8, Shenzhen International Innovation Valley, Dashi Road, Nanshan District, Shenzhen, Guangdong, China Emai: support@geniatech.com Tel: (+ 86) 755 86028588...
-
Page 5: Burning Procedure
（1）Download the Debian system and unzip it as follows: （2）Decompression: rk3566-debian_RKS220407-dk630_hwV1.0_20220923093111.tar.gz file。 Then run RKDevTool.exe in the "RKDevTool_Release" folder as follows: Room 02-04, 10/F, Block A, Building 8, Shenzhen International Innovation Valley, Dashi Road, Nanshan District, Shenzhen, Guangdong, China Emai: support@geniatech.com Tel: (+ 86) 755 86028588... - Page 6 5-10 seconds, it will prompt "Found a LOADER device". Room 02-04, 10/F, Block A, Building 8, Shenzhen International Innovation Valley, Dashi Road, Nanshan District, Shenzhen, Guangdong, China Emai: support@geniatech.com Tel: (+ 86) 755 86028588...
- Page 7 Room 02-04, 10/F, Block A, Building 8, Shenzhen International Innovation Valley, Dashi Road, Nanshan District, Shenzhen, Guangdong, China Emai: support@geniatech.com Tel: (+ 86) 755 86028588...
- Page 8 （5）Click "Upgrade", the upgrade details will be displayed on the right. When complete, the box will automatically restart, and the interface will be displayed normally. Room 02-04, 10/F, Block A, Building 8, Shenzhen International Innovation Valley, Dashi Road, Nanshan District, Shenzhen, Guangdong, China Emai: support@geniatech.com Tel: (+ 86) 755 86028588...
- Page 9 After the erasing is complete, power off and restart to re-enter the burning mode, prompting "Found a MASKROM device"; Follow the below burning steps to burn. Room 02-04, 10/F, Block A, Building 8, Shenzhen International Innovation Valley, Dashi Road, Nanshan District, Shenzhen, Guangdong, China Emai: support@geniatech.com Tel: (+ 86) 755 86028588...
- Page 10 Room 02-04, 10/F, Block A, Building 8, Shenzhen International Innovation Valley, Dashi Road, Nanshan District, Shenzhen, Guangdong, China Emai: support@geniatech.com Tel: (+ 86) 755 86028588...
Need help?
Do you have a question about the DK630 and is the answer not in the manual?
Questions and answers