Advertisement
Quick Links
HIGH CAPACITANCE METER
CONTENTS
GENERAL
INTRODUCTION
TECHNICAL SPECIFICATIONS
OPERATING CONTROLS
OPERATING PROCEDURE
FRONT PANEL DRAWING
Sivananda Electronics__________________________________________________
OPERATING MANUAL
FOR
DIRECT READING
MODEL: LS-16BD
1
Advertisement
Summary of Contents for Siva LS-16BD
- Page 1 OPERATING MANUAL DIRECT READING HIGH CAPACITANCE METER MODEL: LS-16BD CONTENTS GENERAL INTRODUCTION TECHNICAL SPECIFICATIONS OPERATING CONTROLS OPERATING PROCEDURE FRONT PANEL DRAWING Sivananda Electronics__________________________________________________...
- Page 2 GENERAL Some three decades ago, we committed ourselves to fill up the void in indigenous production-oriented test equipments for our fast growing electronic and electrical Industry, which was then dependent on costly imported equipment. Even the simplest of the equipments were being imported with the omnipresent menace of servicing problems. True to our commitment, over the years, dedicated and hard-core professionals at Sivananda Electronics have come out with a wide range of test equipments to cater to the needs of the Indian Electronics and Electrical Components Industry.
- Page 3 & bulk consumers for inspection of incoming material. The LS-16BD is a Direct Reading Meter which gives the value & tan –d of the Capacitor, on two separates meters, in fraction of a second. This eliminates the need of a trained person to operate the various knobs to get null for value &...
- Page 4 TECHNICAL SPECIFICATIONS: Capacitance Range 19.99 uF to 199.9K uF in 5 ranges Tan d Range 0 to 100% (only in Ls-16BD) Test Frequency 120 Hz Accuracy for Capacitance : ± 1% ± 2 Digit For Tan d ±1% ± 2 Digit Indication 3½...
- Page 5 OPERATING CONTROLS: The following controls are provided on the front panel of the meter. ON/OFF Switch. Range Selector Switch. ‘Cal’ Control for Calibration. Two Digital Panel meters for Capacitance value & tan-d Four appropriately marked terminals for connecting capacitance under test. Sivananda Electronics__________________________________________________...
- Page 6 OPERATING INSTRUCTIONS: Switch ON the instrument. Select the range to be used by range selector switch. If in doubt start with higher range. Connect the capacitor under test to the terminal as marked. Read the value of Capacitor & tan –d on the respective meter. If required, the equipment can be calibrated with the help of a standard capacitor and ‘Cal’...
Need help?
Do you have a question about the LS-16BD and is the answer not in the manual?
Questions and answers