PRODUCT USE DESCRIPTION The Arm Hammock is used to comfortably and easily support the patients arms in the prone position during procedures. It is for use on Imaging/Pain Management tables with the Integrated Headrest tabletop style. It is intended to be used by a healthcare professional in a medical environment.
IMPORTANT SAFETY INSTRUCTIONS The Arm Hammock is not designed to support the entire weight of the patient. Do not allow the patient to use in a manner to adjust themselves using their weight on the table or aid in the dismounting of the table.
Le hamac à bras n'est pas conçu pour supporter tout le poids du patient. Ne laissez pas le patient s'utiliser de manière à s'ajuster en utilisant son poids sur la table ou à l'aider à démonter la table. Le Arm Hammock est conçu pour être un appareil autonome. Il ne doit pas être modifié ou incorporé à tout autre équipement.
1) Remove the Face Rest Pad from the head end of the Imaging and Pain Management table. 2) Slip the looped end of the Arm Hammock around the exposed end of the top as shown. The blue label should be facing inside while the small Oakworks logo tag should be facing outside.
ARM HAMMOCK ATTACHMENT INSTRUCTIONS 3) Flip up Arm Hammock and attach the Velcro to the Velcro on the exposed tabletop. If the Velcro does not latch, then the Arm Hammock is backwards. 4) Re-attach the Face Rest Pad onto the head end of the table using the Velcro from the Arm Hammock.
1. Using an approved cleaner or mild liquid soap and water, clean any visible soil off the Arm Hammock. It is recommended that the upholstery be cleaned at least once a week to prevent disinfectant build-up.
Visually inspect the fabric and Velcro straps components for obvious damage that could cause problems during operation. • Check that all fasteners are present and can fasten securely. Clean unusual buildup of dirt on the Arm Hammock not normally cleaned on a regular basis. • • Check for tears in the seams.