Related Manuals for boAt AAVANTE 4100DA
Summary of Contents for boAt AAVANTE 4100DA
- Page 1 USER MANUAL AAVANTE BAR 4100DA 3.1.2 CHANNEL 300W RMS Dolby Atmos Sound Bar (with Subwoofer)
-
Page 2: Components List
USER MANUAL Thank you for choosing the boAt Aavante Bar 4100DA as the audio source for your home. Discover a new level of immersive, cinematic audio experi- ence at home with the boat Aavante Bar 4100DA. With a powerful 300W RMS total output, this sound bar brings every aspect of your entertain- ment be it a song, show or movie to life. -
Page 3: Safety And Warnings
SAFETY & WARNINGS Caution • Read the safety, installation and operating instructions in this user guide before operating the product. • Power and speaker wires should be routed so that they are not likely to be walked upon, kicked or pressed by items placed on or against them. Pay special attention to cords from plugs, power receptacles and the point where they exit from the product. - Page 4 OVERVIEW 1. Power Button: Short press for standby ON/OFF. 2. Input Mode Button: Short press in steps to choose among Bluetooth, HDMI IN, Optical, Coaxial, HDMI(ARC), USB and AUX modes. 3. Play/Pause Button: In Bluetooth/USB mode, short press to play/pause 4.
-
Page 5: Led Display
SOUNDBAR PORTS HDMI OUT Use to connect compatible devices using an HDMI (ARC) cable (not provided). HDMI IN Use to connect compatible devices using an HDMI cable (not provided). OPTICAL IN Use to connect compatible devices using an optical cable (not provided). COAXIAL Use to connect compatible devices using the coaxial cable (not provided) -
Page 6: Remote Control
REMOTE CONTROL : Standby mode for Power ON/OFF 2. PAIR: Connect or disconnect to the pairing device. (long press the button for more than 2 seconds). 3. Volume+ : Master volume up : Pre button: Previous program (Only work under USB & BT Mode). 5. -
Page 7: Installation
INSTALLATION Connect the soundbar and subwoofer using the provided cable and connect the unit to a power source, as depicted in the below diagram. Use the power button to turn on the soundbar. Connect to Power Connect to TV... -
Page 8: Wall Mounting The Soundbar
PLACING THE SOUNDBAR ON AN ENTERTAINMENT UNIT If your TV is placed on an entertainment unit, you can place the soundbar directly in front of the TV stand, centred with the TV screen. If the surface of the table is flat, the soundbar stays firm on its metal feet. WALL MOUNTING THE SOUNDBAR This soundbar can be mounted on your wall. - Page 9 • Measure 31.81 inches (808mm) and drill 2 parallel holes (1/4 inch each) in the wall • Firmly apply a dowel into each hole in the wall (dowel required only for solid wall) Anchor Solid wall (i.e., solid brick, solid concrete, solid wood) Drywall, plastered wall etc.
-
Page 10: Using The Soundbar
USING THE SOUNDBAR Plug in the power cable of the soundbar to an external power socket; the unit goes into standby mode. Power ON/OFF Press the Power on/off button on the remote control or soundbar control panel to turn the soundbar on and off. HDMI(ARC) Connect an HDMI(ARC) compatible device such as TV to the HDMI(ARC) port on the soundbar using an HDMI cable (not supplied). - Page 11 Optical in Connect a compatible device to the OPTICAL input on the soundbar using a digital optical cable (not supplied). Select OPT mode either by pressing the INPUT/MODE button on your remote control or soundbar control panel repeatedly until OPT is displayed on the LED display. Ensure Optical SPDIF is selected as the TV’s audio output, then adjust the volume of the soundbar by pressing the Volume up and Volume down buttons on the remote control or soundbar control panel.
-
Page 12: Technical Specifications
• A damaged power cord can easily cause an electric shock or fire hazard, never use a power cord after it has gotten damaged. TECHNICAL SPECIFICATIONS Model boAt AAVANTE BAR 4100DA Technology Optical, HDMI(ARC), HDMI IN, Bluetooth v5.0, AUX, USB, Coaxial...
Need help?
Do you have a question about the AAVANTE 4100DA and is the answer not in the manual?
Questions and answers