Download Print this page

imarflex IMX-270B Quick Start Manual

Electric hand mixer

Advertisement

Quick Links

REMOVING THE BEATERS/DOUGH HOOKS
Switch the speed control knob into '0' speed setting.
a.
b.
Push down the speed control knob to eject the attachment.
Note:
 The eject button will not work if it is not in '0' position.
 Make sure that the speed control knob is in '0' position before ejecting.
 Do not force to pull the accessories, it may cause damage to the unit.
STORAGE
1.
Put the beaters, dough hooks and power cord inside the Built-in Accessory
Box.
2.
Place the hand mixer on the top of the Built-in Accessory Box (a click sound
will be heard).
CLEANING AND MAINTENANCE:
1.
Make sure to unplug the unit before cleaning.
2.
Remove the accessories from the unit body (kindly read how to remove
accessories for the proper procedure).
3.
All parts are washable with soap and water except the unit body.
4.
The beaters and dough hooks are stainless steel and must be wipe clean
and dry after every use.
Note: If there is crust food or residue left in the accessories. In a separate
bowl fill with warm, soapy water and let sit for about 30 to 60 seconds. Then
rinse it with water and wipe it with dry cloth.
5.
Use damp cloth in cleaning the unit body.
Note: Do not immerse the unit body in water or any other liquid.
6.
To remove stubborn spots, wipe surfaces with a cloth dampened in sudsy
water or a mild, non-abrasive cleaner. Then wipe with a clean, damp cloth.
Do not use abrasive cleansers on any part of the mixer as they can damage
the finish.
MIXING GUIDE
SPEED
0
Eject Button / OFF
This is a good starting speed for bulk and dry foods such as flour and
1
butter.
2
Best speed to start for liquid ingredients for mixing salad dressings.
3
For mixing cakes and quick breads.
4
For creaming butter and sugar, beating uncooked candy, desserts, etc.
5
For beating eggs, cooked icings, whipping potatoes, whipping cream, etc
TURBO
For pulse speed
REMINDER: Please do not forget to fill up and send the warranty card with
receipt to our email address imarflexfb@evergoodinc.com
Distributed By: Evergood Unlimited Corp.
901 G.Masangkay St., Manila
Made in China
DESCRIPTION

Advertisement

loading

Summary of Contents for imarflex IMX-270B

  • Page 1 REMOVING THE BEATERS/DOUGH HOOKS Switch the speed control knob into ‘0’ speed setting. Push down the speed control knob to eject the attachment. Note:  The eject button will not work if it is not in ‘0’ position.  Make sure that the speed control knob is in ‘0’ position before ejecting. ...
  • Page 2 Do not use any appliance with a damaged cord or plug. If the cord is damaged it should be replaced with the same type and size or bring the unit to the nearest Imarflex Authorized Service Center. Do not place the unit near a gas stove, an electric burner or in a heated oven.