Page 3
c::, C • Exploded Parts Parts List Assembly & Use Cleaning Safety Instructions Warranty...
Page 4
SB6c ( Exploded Parts ] Arm Design varies - Check Your Model 500-042 backrest frame design differs depending upon the model. Both designs displayed here. Pans for the design using the plastic mount for the swing-away arm (LH in image) are 100-501 arm) or 100-502...
Page 7
STEP2 T he backrest is supplied with factory fitted ar. m s, fabric backrest and chest safety belt. Note tha t the chest belt can be relocated to a lap belt us i ng the re-drilled holes at the rear of the cushi o n. To fit the backrest complete with ar.
Page 8
The footrests drop into the holder on each front le g of the chair. When pushed all the way down the stai n less steel pin drops into a slot to l ock the footrests into position. To swing the footrests away just lift them and swing to the side, or to remove - lift completely out of the holder.
Page 9
STEP4 The Com i m ode PaH is fitted from the back of the chair by sliding it in into the rails sitting under the seat cush io n. The Pee Gua:rd or Deflector is fitted from the front by sliding it in into the holde rs sitting under the seat cushion, each side of the opening.
Page 11
( Cleaning and Maintenance It is recommended that your shower chair is serviced annually by your Showerbuddy Dealer or an author ised, competent service agent. In addition: 1. Regularly inspect all parts of the chair for defects. Any defective part should be attended to promptly by an authorised service agent.
It is important that the user(s), and/or the caregivers of the user(s), learn how to safely operate the Showerbuddy shower chair. The following must be read before use of the Showerbuddy shower chair to ensure the safe operation of your Showerbuddy shower chair: The Owner(s) Manual must be read and understood before using the Showerbuddy shower chair.
Page 13
DO NOT use the shower chair castor wheel locks as brakes when travelling down inclines. DO NOT position the Showerbuddy shower chair sideways on a slope as this could cause it to tip. Important! Although every effort has been made by the Showerbuddy team to ensure the stability of the Showerbuddy shower chairs during use, it is important to recognize that the most dangerous part of using any shower chair is the transfer.
Page 14
Your dealer should be called to check the fasteners and other components at least once per year. All Showerbuddy shower chairs are supplied with chest and lap restraining belts that ensure the correct and safe operation of the shower chair for both the user(s) and the caregiver. It is important that these straps are used every time the shower chair is operated.
If the store is unable to service the chair, and the above conditions have been adhered to, parts will be provided by Showerbuddy directly to the chair owner with freight payable by the owner.
Page 16
Easy Care Systems Units 5 and 6 Lower Vicarage Road Southampton Hampshire SO19 7RJ T: 02380 420678 E: info@easycaresystems.co.uk ACCESS YOU BATHROOM WITHOUT A REMODEL...
Need help?
Do you have a question about the easycare SB6c and is the answer not in the manual?
Questions and answers