Page 2
User Manual Dear Music Lover, thank you for purchasing our CANOR CD 1.10 Tube Compact Disc Player and a D/A Converter. To preserve and maintain the best characteristics of your compact disc player, we recommend you carefully read the following lines.
The longer the period during which you do not use the CD 1.10 you should disconnect the power cord from the main supply, or at least turn off the main power switch located on the back of the device.
CAUTION! The Waste Electrical and Electronic Equipment Directive -Regulation of the European Union 2002 / 96 / EC governing the issue of separate waste collection. This device may not be disposed of in unsorted municipal waste. Devolve the appliance into a collection center for recycling and disposal of electrical and electronic equipment waste.
BASIC FUNCTION OF REPRODUCTION Connect the power cord to the CD 1.10. Turn on the player with the main Power Main switch, which is located on the back panel. When you turn on the switch, the player is set into stand-by mode and the red LED on the front panel is on.
Page 6
These inputs can process a 24-bit PCM signal with a 192 kHz sampling rate. • USB – By selecting this input, it is possible to connect CD 1.10 to a PC as a USB Audio Class 2.0 soundcard. TECHNICAL SPECIFICATIONS...
Page 7
Format, bit resolution, and the sampling rate of outputs COAXIAL PCM 16-bit / 44,1 kHz* OPTICAL PCM 16-bit / 44,1 kHz* * Outputs in operation only during CD playback. CD Input Harmonic distortion RCA < 0,01% (1 kHz / 44,1 kHz) Harmonic distortion XLR <...
The warranty covers defects in materials and labor but does not cover misuse, unauthorized modifications, and external causes such as acts of nature. Caution! There are no user-serviceable parts inside your CANOR CD 1.10 Tube Compact Disc Player and D/A Converter! SERVICE Should you encounter a problem that you are not able to alleviate or identify, please contact your distributor for further advice.