Advertisement
Quick Links
CONGRATULATIONS
Congratulations in choosing a unique product to enhance your slot car track
diorama. This can truly be described as a product born from a love for slot cars.
Buying this product have made you a member of a very special family, yes you are
not dealing with a faceless business, but rather a family of slot car fanatics.
We put hours of skill and more importantly love into our products and it is wonderful
to share our love for slot cars with you. May you enjoy the build and have years of
joy having it as part of your trackside diorama.
This product is an imaginary set of billboards displaying well-known products from
the world of motor racing. The product is made up of a generic support structure and
a dedicated billboard that is fixed to the structure. There is a selection of billboards to
match the shape and size of the different artwork that you can choose from.
We think that one or more of these billboards will add a lot of character and realism
to any trackside diorama.
WARRANTY
This product is covered by a comprehensive money-back warranty to ensure your
absolute satisfaction with your purchase.
WHO ARE WE?
This product is brought to you by racetrackscenics.com. If you have not done so
already, please visit our website today. You are also most welcome to visit the
Facebook pages
"Race Track Scenics Slot Car Scenery" and "Johan Malan" to
keep up to date with the latest developments and the launching of exciting new
products that may be in the pipeline.
You can contact Kevin Sharpe on
Email: racetrackscenics@gmail.com
Text in the USA 586 549 2879
WhatsApp 1-586-549-2879
for any assistance that you might require. Your feedback and a photo or two of your
trackside addition will really be appreciated. We love to share in your joy!
ASSEMBLY INSTRUCTIONS
RTS 8A80 GENERIC BILLBOARDS
1
Advertisement
Related Manuals for RACE TRACK SCENICS 8A80
Summary of Contents for RACE TRACK SCENICS 8A80
- Page 1 You are also most welcome to visit the Facebook pages “Race Track Scenics Slot Car Scenery” and “Johan Malan” to keep up to date with the latest developments and the launching of exciting new products that may be in the pipeline.
-
Page 2: What Is In The Kit
WHAT IS IN THE KIT? In this kit you will find all the laser cut pieced needed to assemble this product. The pieces are still intact in the sheets as they were cut to ensure that all the parts are there. -
Page 3: Familiarize Yourself
FAMILIARIZE YOURSELF Have a look at two photos that shows some of the billboards from the front and back. - Page 4 Now have a look at the next diagram where all the laser cut parts are shown and numbered from A to Z. We will identify each piece as well as where they fit in. You will notice that this product is made up of a support structure and a specific billboard.
- Page 5 PREPARING THE CUT PIECES Firstly, remove all the laser cut parts from the sheet. The sheet can be discarded. Clean the edges of the parts if there are any tiny bits where the parts were fixed to the sheets. This can be done with your knife or even your thumb nail. We recommend that you start by sanding your finished product with a very light sandpaper to ensure a smooth finish for the end product.
- Page 6 LET’S GET STARTED WITH THE ASSEMBLY You can start by supporting the two leg girders (X 1-2) in an upright position. Then you can proceed to glue in the top and bottom front beams (Z 1-5) and one of the rear beams (Y 1-5).
- Page 7 CONCLUSION We sincerely hoped you have enjoyed this assembly and finishing. Please remember to give us some feedback and either send or post some pictures of this product on your track.
Need help?
Do you have a question about the 8A80 and is the answer not in the manual?
Questions and answers