Table of Contents
Advertisement
How to Get Started
Wired LAN
Using cables and network adapters to connect to the Internet. Before setting up the
connection of Dynamic IP/PPPoE or Broadband (PPPoE) or Static IP, contact your Internet
Service Provider (ISP) or network administrator for assistance of setting up Internet
connection.
▶ Dynamic IP/PPPoE Connection
1.
Open up Settings, find and click [Network & Internet].
2.
Select [Ethernet] within the Network & Internet selection menu.
3.
Select [Change adapter options] to bring out Network Connections window.
4.
Right click on [Ethernet] to select [Properties] from the drop-down menu.
5.
Open up Ethernet Properties window, find and select [Internet Protocol Version
4 (TCP/IPv4)] in Networking tab. Then click [Properties] to continue.
6.
Click [Obtain an IP address automatically] and [Obtain DNS server address
automatically] in General tab. Then click [OK].
▶ Static IP Connection
7.
Follow the previous steps 1 to 4 to continue.
8.
Click [Use the following IP address] and [Use the following DNS server
addresses] in General tab. Fill the IP address, Subnet mask, Default gateway,
Preferred DNS server, and Alternate DNS server. Then click [OK].
3-24
Advertisement
Table of Contents
