Installation - Philips LRM3320W/27 Manual

Installation

NOTE: The magnet must be placed on the
right side of the alarm. The arrows on the
alarm and the magnet must align.
1. Locate a postion on the window or door to be
protected that allows easy access to the OFF/
CHIME/ALARM switch. Make sure switch is in
OFF position. Make sure the surface you are
mounting to is clean and dry. For best results,
clean the mounting surface with a mixture of
50% isopropyl alcohol and 50% water.
2. Peel the protective covering from one side of
the double-sided tape and then apply to the
back of the alarm. Remove protective covering
from the back side of the double-sided tape
and lightly mount the alarm or the magnet
on the part of the entry that opens (i.e. the
window or door itself)
5