Advertisement
Setting the Time and Date Manually
Make sure you select your Home City code before you change the current
time and date settings. World Time Mode times are all displayed in
accordance with the Timekeeping Mode settings. Because of this, World Time
Mode times will not be correct if you do not select the proper Home City code
before setting the time and date in the Timekeeping Mode.
To set the time and date manually
1. In the Timekeeping Mode, hold down A until
City code
the city code starts to flash, which indicates
the setting screen.
2. Press C to change the flashing contents in
the sequence shown below to select other
settings.
12/24-Hour
City Code
DST
Format
Power
Day
Month
Saving
3. When the setting you want to change is flashing, use B and/or D to
change it as described below.
Screen:
To do this:
Change the city code
BJS
Toggle between Standard Time (
and Daylight Saving Time (
Toggle between 12-hour (
24-hour (
24H
) timekeeping
Reset the seconds to
Change the hour or minutes
Change the year, month, or day
Toggle Power Saving on (
(
)
• See "City Code Table" for a complete list of available city codes.
• For information about Power Saving, see "Power Saving Function".
4. Press A to exit the setting screen.
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour
from Standard Time. Remember that not all countries or even local areas use
Daylight Saving Time.
• As of July 2007, China does not use Daylight Saving Time (DST). If China
does go to the Daylight Saving Time system in the future, some functions of
this watch may no longer operate correctly.
• If you experience problems receiving the time calibration signal in your
area, it probably is best to switch between Standard Time and Daylight
Saving Time (summer time) manually.
To change the Daylight Saving Time (summer time) setting
1. In the Timekeeping Mode, hold down A until the city code starts to flash,
which indicates the setting screen.
2. Press C and the DST setting screen appears.
3. Press D to toggle between Daylight Saving Time (ON displayed) and
Standard Time (OFF displayed).
4. When the setting you want is selected, press A to exit the setting screen.
• The DST indicator appears to indicate that Daylight Saving Time is turned
on.
Operation Guide 3127
Seconds
Hour
Year
Minutes
Do this:
Use D (east) and
B (west).
Press D.
)
)
Press D.
12H
) and
Press D.
Use D (+) and
B (–).
Press D.
) and off
Reference
This section contains more detailed and technical information about watch
operation. It also contains important precautions and notes about the various
features and functions of this watch.
Button Operation Tone
The button operation tone sounds any time you
press one of the watch's buttons. You can turn the
button operation tone on or off as desired.
• Even if you turn off the button operation tone,
the alarm, Hourly Time Signal, and Countdown
Timer Mode alarm all operate normally.
To turn the button operation tone on and
off
Mute indicator
In any mode (except when a setting screen is on
the display), hold down C to toggle the button
operation tone on (mute indicator not displayed)
and off (mute indicator displayed).
• Since the C button is also the mode change button, holding it down to turn
the button operation tone on or off also causes the watch's current mode to
change.
• The mute indicator is displayed in all modes when the button operation tone
is turned off.
Power Saving Function
When turned on, the Power Saving function
enters a sleep state automatically whenever the
watch is left in an area for a certain period where
it is dark. The table below shows how watch
functions are affected by the Power Saving
function.
Power saving indicator
Elapsed Time
Display
in Dark
60 to 70 minutes
Blank, with Power Saving
indicator (PS) flashing
6 or 7 days
Blank, with Power Saving
indicator (PS) not flashing
• Wearing the watch inside the sleeve of clothing can cause it to enter the
sleep state.
• The watch will not enter the sleep state between 6:00 AM and 9:59 PM. If
the watch is already in the sleep state when 6:00 AM arrives, however, it
will remain in the sleep state.
To recover from the sleep state
Perform any one of the following operations.
• Move the watch to a well-lit area.
• Press any button.
• Angle the watch towards your face for reading.
To turn Power Saving on and off
1. In the Timekeeping Mode, hold down A until
On/Off status
the city code starts to flash, which indicates
the setting screen.
2. Press C nine times until the Power Saving
on/off screen appears.
3. Press D to toggle Power Saving on (
off (
4. Press A to exit the setting screen.
• The Power Saving indicator (PS) is on the
display in all modes while Power Saving is
turned on.
Auto Return Features
• If you leave the watch in the Alarm Mode for two or three minutes without
performing any operation, it returns to the Timekeeping Mode automatically.
• If you leave the watch with a flashing setting on the display for two or three
minutes without performing any operation, the watch exits the setting
screen automatically.
Scrolling
The B and D buttons are used in various modes and setting screens to
scroll through data. In most cases, holding down these buttons during a scroll
operation scrolls through the data at high speed.
Operation
All functions enabled, except
for the display
Beeper tone, illumination,
and display are disabled.
) and
).
6
Advertisement
