Kawai RV-4 User Manual

Four Stereo Effect Processors
eiV-
User's Manual |
Preface
Welcome to your new KAWAI 4 Stereo Effect Processors RV-4!
Before you start using your new SYSTEM, please do read through this manual. It will help you to understand and get
maximum enjoyment out of each and every function provided by the RV-4 and to keep the machine in peak running
condition.
Features
® Built-in effect processor
The RV-4 comprises of 4 stereo IN/OUT effect processors. This configuration enables you to create a detailed and
wide sound quality by 8IN/80UT.
@ Creating and storing sets of original effects
You can select the method in which to connect the 4 effect processors, including serial and parallel connection. You
can combine these connecting methods and create up to 50 sets of original effects. These sets you can store as user
PROGRAMS in the user area of the SYSTEM memory.
@ [ndividual external output for each effect processor
Each of the 4 effect processors has its own external output even when the processors are connected serially. Therefore,
you can select an output in accordance with the phase of the serial connection of an effect, even with the same sound.
@ Built-in 100 PROGRAMs and 400 EFFECT SETTINGs
The RV-4 contains in its memory 100 PROGRAMs and 400 EFFECT SETTINGs. These PROGRAMs and SETTINGs were
pre- programmed based on 19 kinds of effects that were selected meticulously.
@ Headphones jack
The RV-4 features a headphones jack. You can directly monitor the output of SOUT without using a mixer.
@ MIDI
When you use MIDI, you can change the PROGRAM from an external device. You can also change the type of effect
only without changing the four effect processor connections.
@ MIDI clock
You can automatically set the delay time by MIDI clock (tempo information). This will enabie you to obtain delay
effects according to the tempo of each musicai piece of the connected sequencer.
18-bit DA converter
The RV-4's 18-bit DA converter enables a high grade effect performance.
AWAI
i- |