MTD 111-110A Owner's Manual page 6

I
7. Secure throttle control wire to handle with
two cable ties (D) provided in hardware pack.
—See figure 6.
8. Siip hand grips (F) on the upper end of each
handle. They will slip on more easily if you
first soak them in warm, soapy water.
9. Check all nuts and bolts for correct tightness.
FIGURE 6.
Chute Deflector
Shipping Block
To Be Removed
CAUTION
Please note that the chute deflector
on your mower is in an upright posi¬
tion. It is held in that position by a
shipping block. This block is used
for shipping purposes only. It must
be removed and discarded before
your mower is put into operation.
See figure 7.
FIGURE 7.
6