Summary of Contents for LP LP2000
- Page 1 PORTABLE POWER STATION For Your Safety Before use, read this manual carefully so that you understand its contents. Keep this manual so that you can refer to it at any time if necessary.
-
Page 2: Table Of Contents
Table of contents 1. SAFETY ..................................2 2. GENERAL DESCRIPTION ............................3 3. KEY FEATURES ................................4 4. CONTROLS AND CONNECTIONS ..........................5 5. USE ....................................6 6. STORAGE AND MAINTENANCE ..........................9... -
Page 3: Safety
1. SAFETY Before using this product, please note the following to avoid damage to your electronic devices or dangerous situations. Check all input and output connections of your electronic devices. To avoid fire or electric shock, check all current ratings listed on this product and on the devices you intend to use. 1) This product contains a rechargeable lithium battery. -
Page 4: General Description
12V DC lighter socket (DC): cool box in vehicle, 12V devices, etc. AC connection (alternating current): electrical appliances such as televisions, laptops, etc. *Electric appliances which you intend to use must be less than the device’s continuous output power. (LP2000: 2000 W / LP3000: 3000 W) -
Page 5: Key Features
3. KEY FEATURES LP2000 LP3000 Capacity 25.6V 75 Ah 1920Wh 25.6V 120 Ah 3072Wh Battery type Rechargeable LiFePO4 battery AC connection 230 V, 50 Hz, pure sine wave (2 AC connections) 2000 W 3000 W Continuous power Peak power 4000 W... -
Page 6: Controls And Connections
4. CONTROLS AND CONNECTIONS FRONT Handle 12V DC Output TFT Screen USB-A TYPE-C Ventilation Hole AC Output AC Switch DC Switch Power Indicate Light BACK Power Switch 12V Car Lighter Output Anderson Input 7909 Input Floor Mat AC Input Cooling Fan Output Power SOC (State of Charge) Charging Status... -
Page 7: Use
5. USE 1) Use of the power station Press power switch to turn on the power station, then LCD indicator will be launched. Press AC ON/OFF button to turn it on, AC ON character will display. Connect one end of the cable to the AC socket and the other end of it to your electric appliances after the AC function has been turned on for 3 seconds. - Page 8 2) Charging the power station Charging with the adapter or AC cable (Max charging power: LP2000 : 500W / LP3000 : 1000W ) Plug the charging cable into wall outlet, then connect the other side to the DC input port by the adapter or the AC port by the AC cable of the power station, you can see the charging state from the LCD display.
- Page 9 Please note: Use a charger recommended by the producer when charging through a wall outlet. For solar charging, use a solar charger that meets the following specifications: DC: 12 - 30 V, Category “More than 200 W” Type of charging: MPPT Plug: DC-plug 3) Use of EC5 connection a.
-
Page 10: Storage And Maintenance
6. STORAGE AND MAINTENANCE Failure to maintain your power station by following steps can result in battery damage. Please charge your power station before storage and fully recharge it every 6 months at least. Store it in a cool and dry place. If the main power supply shuts down automatically because of lower battery capacity, please recharge it within 3 months.
Need help?
Do you have a question about the LP2000 and is the answer not in the manual?
Questions and answers