LG DLGX3901B.ABLEEUS Owner's Manual page 42

42 OPERATION
Energy Saver
This option helps to reduce the energy
consumption of the Normal cycle, depending on
the load size. When the Energy Saver option is
selected, the cycle begins with an air dry section
and the drying time is increased.
Default On/Off
This option allows the Energy Saver settings to be
changed. To run a Normal cycle without the
Energy Saver option, press and hold the Energy
Saver button for 3 seconds.
the display.
Custom PGM
Save special combinations of settings that are
used frequently as a custom program.
Saving a Custom Program
1
Turn on the appliance and select the desired
settings using the cycle selector knob and
cycle modifier or option buttons.
2
Press and hold the Custom PGM button for 3
seconds.
NOTE
• Only one custom program can be saved at a
time. Pressing and holding the Custom PGM
button will overwrite any previously saved
custom program.
Recalling a Custom Program
1
Turn on the appliance and press the Custom
PGM button.
2
Press the Start/Pause button to start the
cycle.
More Time / Less Time
Use these buttons to increase or decrease drying
time in 5 minute increments when you use manual
drying cycles such as Speed Dry, Air Dry and Time
Dry.
or appears in
ON OFF
Wrinkle Care
Selecting this option will tumble the load
periodically for up to 3 hours after the selected
cycle, or until the door is opened. This is helpful in
preventing wrinkles when you are unable to
remove items from the dryer immediately.
Press the Wrinkle Care button before you start a
drying cycle.
NOTE
• When the option is turned on, a rectangle with a
dashed line and
ENd
the feature is off.
• When the option is turned on, only the Power
button works after the drying cycle ends.
• To select the option after starting a cycle, pause
the cycle, set the option, and press Start/Pause.
• Always turn off the appliance before unloading
the clothes.
Control Lock
Use this function to disable the controls. This
function can prevent children from changing
cycles or operating the dryer.
NOTE
• The function does not lock the door.
• Once this function is set, all buttons are locked
except the Power button.
• When the controls are locked,
remaining time are alternately shown on the
display during the dry cycle.
• Turning off the power will not reset this function.
You must deactivate this function before you can
access any other options and functions.
Locking/Unlocking the Control Panel
1
Turn on the power.
2
Press and hold the Wrinkle Care button for 3
seconds to activate/deactivate this function.
• When the function is deactivated, a chime will
sound and the remaining time for the current
cycle will reappear on the display.
appears on the display until
and the
CL