Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for OKASHA E1001-RGB
Summary of Contents for OKASHA E1001-RGB
- Page 1 Smart RGB Corner Lamp User Manual 16 Million Colors...
-
Page 2: Product Description
Product Description Lamp Tube (Included LED Strip) Package Include: Smart Floor Light Lamp *1 143cm/ Power Adapter *1 56.3in Remote Controller *1 Tool Kit *1 User Manual *1 35cm/ 13.7in IR Receiver 35cm/ Mic for Music Sync 14.5in Power Port 13cm/5.1in... -
Page 3: Key Description
2. Adjust the brightness of Speed- red/green/blue until your favorite color. Scene Mode Music Mode Timing Specification Model: E1001-RGB LED Type: RGB5050 (72PCS) Cable Lenght: 1.5m Input: DC24V Wattage: 10W Remote Control Receiving Signal Range: 5M Working Temperature/Humidity: -20-45 C/<80%RH Size: 130*1430mm... -
Page 4: Read Before Use
Read Before Use 1. This device works with 2.4GHz Wi-Fi network only, does not compatible for 5GHz Wi-Fi network. If you have a dual-band router, please set the relevant bandwidth of the router before Wi-Fi configuration. 2. If you change the Wi-Fi password, please remove the lamp on the App then reconnect it to the App with the new Wi-Fi password. - Page 5 Installaion Connect the four light tubes in order from 1 to 4. (Pole 2,3 are interchangeable), make the three plastic joint plug into the aluminum tube. Notes: 1. Please aim at the hole position and don’t press randomly. 2. Please do not turn on the power when assembling the light.
- Page 6 Download Scan the QR code below to download the “Okasha Smart” App in App Store(iOS) or Play Store(Android). Then register the account with your phone number or email address. Download on the Connection There are two configuration mode (Bluetooth Mode/ Quick Mode) available for you to add the device.
-
Page 7: Bluetooth Configuration
1. Bluetooth Configuration Step 1 Turn on your phone’s Bluetooth. Power ON the device. Step 2 Confirm if the light is in Red blinking rapidly status (flashes twice per second). If it does not flash or flash slowly(flash every two seconds), please unplug the power supply first, then plug and unplug the power supply by 3 times (ON-OFF-ON-OFF-ON). - Page 8 Step 3 Access to the App, click icon “+” or “add device”. The device will pop up automatically, click “Go to add”. Devices to be added: 1 Corner Floor Lamp Do not add Go to add Step 4 Input your Wi-Fi password, click “Next”. Wait for the device connected to the network.
- Page 9 2. Quick Mode Configuration *At this mode, please turn off your phone’s Bluetooth. Step 1 Power ON the device, make sure the light is in Red fast blinking state for Wi-Fi connection. If not, please do the reset operation. Step 2 Access to the App, tab icon “+”...
- Page 10 Your Wi-Fi Password Step 4 Wait for the device to connect to the network, once added successfully, you can set the nick name on this interface.
- Page 11 Q: Failed to Connect? A: 1) First please make sure your Wi-Fi network is 2.4GHz, this device does not support the 5G. And the Wi-Fi password you inputted correctly. 2) Please make sure the light is blinking rapidly in Red for button for Wi-Fi connection, if not, please do the reset operation (plug and unplug the power cable for three times (ON-OFF- ON-OFF-ON) till the light flashed quickly for Wi-Fi connection.
- Page 12 Explore the whole new world of Smart Devices & Easy access to Smart World Explore the whole new world of Smart Devices & Easy access to Smart Life...