Advertisement
DT-156
|
7)
Remove
the 3 Magazine
Mechanism. Assembly
fixing
5.
Removing the TAPE 1 Mechanism
screws (2) shown in Fig. 6.
5.1
Removing the Tape 1 Mechanism Ass'y
8)
Remove the seven wires running from the power trans-
1)
Remove the Magazine Mechanism Ass'y according the
former to the Main
P.C.B., and remove the wiring
method outlined earlier in 4.
(connector)
running
from
the
Magazine
Mechanism
2)
Remove the two screws
and remove the Cassette
Ass'y to the Main P.C.B.
Loading Rail.
9) When the 3 Magazine Mechanism Ass'y fixing screws
3)
Remove the two screws (5) and remove the Cassette
shown
in Fig. 7 are removed, the Magazine
Guide.
Mechanism can be removed.
4)
Remove
the four screws
and remove the Tape 1
Mechanism.
LEFT SIDE OF SET
CASSETTE GUIDE
SCREWS (16)
\,
PLASTIC RIVET
OPEN/CLOSE SWITCH PCB
ee
®
PROGRAM SWITCH PCB
TAPE 2 SWITCH PCB
Fig. 6
MAGAZINE MECHANISM ASS''Y
Fig. 7
Advertisement
