Sony LBT-A57CD Service Manual page 26

MODEL IDENTIFICATION
- Specification Label -
CDP-M54
CDP-M43
WLLL
NOTES ON HANDLING THE OPTICAL PICK-UP
BLOCK OR BASE UNIT
The laser diode in the optical pick-up block may suffer
electrostatic breakdown because of the potential differ-
ence generated by the charged electrostatic load, etc. on
clothing and the human body.
During repair, pay attention to electrostatic breakdown
and also use the procedure in the printed matter which is
included in the repair parts.
The flexible board is easily damaged and should be
handled with care.
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be
focused on the disc reflective surface by the objective lens
in the optical pick-up block. Therefore, when checking the
laser diode emission, observe more than 30cm away from
the objective lens.
move. no. ZZ
|. Identify the set with the indication of "MADE IN FRANCE? here.
Identify the set with the indication of "MADE IN JAPAN" here.
AEP, Italian Model :
AC 220 - 230V ~ 50/60Hz
E, Saudi Alabia Model :
AC 110 - 120, 220 - 240V,
UK, Australian Model :
AC 240V ~ 50/60Hz
'CDP-M43/M54
~ 50/60Hz 12W