Download Print this page

Advertisement

Quick Links

EN
Instructions for use of the electric saw Solight RNP150
The RNP150 handheld cordless saw uses a high quality new generation carbon-free motor for propulsion,
which has a significantly longer service life than the carbon motors used previously. Please read the following
instructions carefully and follow them to ensure that the product serves you safely and to your full
satisfaction. Avoid unprofessional handling of this tool, and always observe the electrical appliance use
policy. Keep the instruction manual carefully. Never expose to environments with high humidity, avoid
contact of the product with liquids.
Part of the package
1pc Handheld cordless chainsaw
1pc 21V 2Ah Li-Ion battery
1pc Charger
Parameters
Model
Power
Cutting speed
Supply voltage of the saw
Cutting length
Battery type
Battery capacity
Charger supply voltage
Charging current
Charging time 2Ah battery
Weight (without battery)
Description
Fully charge the battery before first use. Then connect it to the saw. See the charging section.
The description of the saw may vary slightly depending on the model used. In principle, however, all
functions are the same.
Oil filler cap
Hand oil pump
Fuse
Li-Ion battery
1pc Manual
1pc Wrench
1pc Screwdriver
RNP150
630 W
5 m/s
DC 21V
max. 150mm
Li-Ion
2 Ah (can be purchased 4 Ah, 6 Ah)
AC 230V/50Hz
0,8 A
Cca 2h
1,2 kg (without battery)
Switch
Wing nut
Chain
guide bar
Chain cover
Sidebar
Cover

Advertisement

loading
Need help?

Need help?

Do you have a question about the RNP150 and is the answer not in the manual?

Questions and answers

Summary of Contents for Solight RNP150

  • Page 1 Instructions for use of the electric saw Solight RNP150 The RNP150 handheld cordless saw uses a high quality new generation carbon-free motor for propulsion, which has a significantly longer service life than the carbon motors used previously. Please read the following instructions carefully and follow them to ensure that the product serves you safely and to your full satisfaction.
  • Page 2 Disassembling the chain Remove the battery before any service work. 1.Unscrew the wing nut and 2. Remove the guide bar and remove the cover. replace the chain. Align the inner links of the chain into the groove of the guide plate. 3.
  • Page 3 Pay attention to the direction of the chain Mounting the chain on the guide rail teeth - they must point in the direction shown in the picture: 4. Replace the side cover and tighten the lock nut Tightening the chain A new chain pulls out very quickly at the beginning of use.
  • Page 4 • For faster charging, you can purchase the Solight RN-RNB fast charger, which cuts charging time by about half. • In the event of damage, a replacement chain can be purchased with Solight RNP150-R, and a replacement guide bar with Solight RNP150-L.