AccesStyle MT-A/12-1500/MPCS User Manual

Multi-tool cordless (renovator)

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

ELECTRIC HAND TOOL

ACCESSTYLE

MULTI-TOOL CORDLESS

(RENOVATOR)

MODEL MT-A/12-1500/MPCS

USER MANUAL

Dear buyer! Thank you for purchasing an Accesstyle brand tool. All our products are manufactured to the

highest quality requirements.

We hope that our tool will fully meet your expectations.

For long life, efficient and safe operation, please read this manual carefully and keep it for future reference.

When purchasing a product:

- require checking its operability by trial closing, as well as completeness, according to the delivery set given

in this manual;

- make sure that the warranty card is properly executed, contains the date of sale, the stamp of the store and

the signature of the seller;

Attention! Power tools are hazardous equipment. To avoid electric shock, fire and/or serious injury you need

STRICTLY respect the warnings and instructions. Read all safety warnings and all instructions before

operating a power tool. Save all warnings and instructions for future reference

Table of Contents

Summary of Contents for AccesStyle MT-A/12-1500/MPCS

Page 1 (RENOVATOR) MODEL MT-A/12-1500/MPCS USER MANUAL Dear buyer! Thank you for purchasing an Accesstyle brand tool. All our products are manufactured to the highest quality requirements. We hope that our tool will fully meet your expectations. For long life, efficient and safe operation, please read this manual carefully and keep it for future reference.
Page 2: Application Area
1. APPLICATION AREA The power tool is designed for scraping, sawing and cutting wood materials, plastics, plaster, non-ferrous metals and fasteners (eg unhardened nails, paper clips). It is also suitable for processing soft wall tiles, dry sanding and polishing small surfaces. ATTENTION! This tool is intended for domestic use only.
Page 3: Brief Description Of The Product
BRIEF DESCRIPTION OF THE PRODUCT Fig. 1 1. Switch 2. Handle with rubber pad 3. Battery 4. Battery lock 5. Vibration frequency setting wheel 6. Inner flange 7. Gear housing 8. Sanding plate 9. Saw blade 10. Chabert 11. Sanding paper 12.
Page 4: General Safety
GENERAL SAFETY ATTENTION! To help prevent fire, electric shock, and injury when using power tools, follow the safety guidelines listed below! 1. SAFETY IN THE WORKPLACE • Keep your work area clean. Disorder or unlit areas in the workplace can cause an accident. •...
Page 5 • Wear suitable work clothes. Do not wear loose clothing or jewelry. Keep hair, clothing and gloves away from moving parts. • Loose clothes, jewelry or long hair can be caught in rotating parts. • If it is possible to install dust extractors and dust collectors, check their connection and correct use.
Page 6 with the saw blade creates a risk of injury. • Use appropriate metal detectors to locate pipes or wires hidden in the wall, or contact your local utility company for help. Contact with electrical wiring can cause fire and electric shock. •...
Page 7 the case and screws, as well as plates and stickers with instructions and specifications. 16. Use the charger only at the voltage indicated in the device's rating plate. 17. Failure to comply with the rules of this manual or temperature conditions may result in battery leakage.
Page 8: Removing And Installing The Battery
Fig. 1 REMOVING AND INSTALLING THE BATTERY ATTENTION! Before installing/removing the battery, make sure that the switch (1, Fig.1) is in the off position. 1. Installing the battery. Insert the battery (3) into the tool handle until it clicks, pressing clips (4) on both sides of the battery.
Page 9 - Charge the battery whenever a decrease in tool power is noticed. Do not operate the tool if the battery is dead. - Do not immerse the battery or charger in water or other liquid. - Do not open the battery or charger. WORKING WITH THE MULTI-FUNCTION TOOL •...
Page 10 INSTALLATION / CHANGE OF THE WORKING TOOL (FIG. 2). 1) Remove (if present) the installed working tool. To remove the working tool, unscrew the screw 13 (Fig. 1) with a hex wrench 14 (Fig. 1) and remove the working tool. 2) Install the working tool on the inner flange 6 (Fig.1) so that the grooves of the tool engage with the pins on the flange (Fig.2).
Page 11: Tool Operation
TOOL OPERATION. Pay attention to mains voltage! The voltage of the power source must match the data on the rating plate of the power tool. ON/OFF (FIG.4). Make sure the tool switch is in the OFF position before inserting the battery. To turn the tool on and off, move the switch (1, Fig.
Page 12: Maintenance
MAINTENANCE ATTENTION! Remove the battery from the power tool before carrying out maintenance work, changing tools, etc., and during transport and storage. To ensure high-quality and safe operation, keep the power tool and ventilation slots clean at all times. Wipe the instrument regularly with a damp cloth, do not use solvents.
Page 13: Troubleshooting
TROUBLESHOOTING Problem Possible Causes Corrective Action Low battery Check battery level Move the switch to one of the main Reverse switch in in-between position positions Faulty electric motor Tool does not turn on Contact an authorized service Faulty switch center Carbon brushes runout Carbon brushes runout Contact an authorized service...
Page 14: Service & Maintenance
5. Warranty service is performed by organizations authorized for this - authorized service centers, the list of which is contained on the support page of the website http://www.accesstyle.ru and is available by phone 8-800-250-07-17. During the warranty period, the elimination of manufacturing defects is free of charge for the buyer upon presentation of the original completed warranty card and / or documents confirming the fact and date of purchase (cash receipt).