Front Io Board - Asus ROG Strix G13CH Service Manual

Disassembly Notice Please be sure to pull out AC POWER CORD.
Step 1 : Remove screws *4pcs.(Red and green mark)
Step 2 : Flip up the bracket and remove screw *1pc, then separate the FRONT IO BOARD and bracket.
Step 3 : Disconnect Audio cable, remove tape from FIO USB CABLE(USB3.0) cable connector, then disconnect it.
1
Unscrew

FRONT IO BOARD

2
Flip up the bracket and remove screw*1pc
3
Disconnect Remove ACETATE TAPE
FRONT IO BOARD
USB CONN GASKET
Screws
Separate the IO
BOARD and bracket
Assembly Notice
When assemble FIO USB cable on FRONT IO BOARD,
please follow below steps to paste USB CABLE ACETATE
TAPE.
Step1, USB CABLE ACETATE TAPE align the centerline
and parallel to the IO BOARD.
Bracket FRONT IO BOARD
Step2, Winding it parallel the connector.
QTY Spec
2 #6-32*6L(7.1,2.3) (B) #2
3 M3*4L (6.3,2.05) (B) #2
3 Unscre
w
Torque (kgf-cm)
8.0±0.5
6.0±0.5
21
Back