Page 2
IMPORTANT! READ CAREFULLY AND KEEP FOR IMPORTANT: • Adult assembly required. FUTURE REFERENCE. • Care should be taken in unpacking and assembly. • Examine highchair frequently for damage, missing or loose parts. • Your child’s safety may be affected if you do not follow these instruc�ons. •...
HIGHCHAIR INFORMATION ASSEMBLY CHAIR LEG ASSEMBLY Insert the leg (1) into the base holder (2). Please note that each of the four legs has a spring-loaded pin. Line up the seat base, so that the small hole on the base holder lines up Removable PU seat cover with the pin.
HIGHCHAIR ASSEMBLY TRAY ASSEMBLY To use the product as a highchair, connect the seat and table (9) together. Li� the seat up To mount the tray, slide both latches on the bo�om of the tray (13) and slide the tray in and insert the seat legs into the plugs on the table top (10).
Page 5
TABLE ASSEMBLY CONVERT TO PLAY CENTRE To use the product as a table, separate the seat from the table . Press the pegs on the legs The table can be turned into a 360 play centre. To do this, remove the overlay on the table of the upper part of the seat (17) and then remove the chair from the table (18).
OPTIONAL EXTRA ACCESSORIES BATTERY INSTALLATION: Play centre foot pad: • Locate the ba�ery compartment door on the bo�om of the toy tray. • For use in Play Centre mode with 360 seat. Ensure all straps are a�ached to the legs of •...
CARE & MAINTENANCE Play Chair: • For use on the ground as an additonal chair with the table. Clean fabrics with a damp cloth and mild detergent, and dry thoroughly. Clean base and seat frame with a damp cloth and mild detergent, and dry thoroughly.
YOUR WARRANTY POLICY Register your product today at babystyledirect.co.uk. At BabyStyle, we guarantee your product has been manufactured in accord- ance with all current European safety standards which are applicable to this product, and that this product is free from any defects in workmanship and material at the �me of purchase.
Need help?
Do you have a question about the Oyster HOME 4-IN-1 HIGHCHAIR and is the answer not in the manual?
Questions and answers