Preparing For Use; Control Panel Instructions - Oster CKSTAFLC-DM User Manual

5q air fryer
Hide thumbs Also See for CKSTAFLC-DM:
Table of Contents

Advertisement

Available languages

Available languages

PREPARING FOR USE

1. Place the appliance on a stable, horizontal and even surface. Do not
place the appliance on non-heat-resistant surface.
2. Place the basket in the pot (Fig.3). Do not fill the pot with oil or any
other liquid. Do not put anything on top of the appliance, the airflow will
be disrupted and affects the hot air frying result.
COOKING
1. Plug the Air Fryer into an electrical outlet.
2. Carefully pull the pot out of the Hot-air fryer (Fig.6)
3. Put the ingredients in the basket. (Fig.5)
4. Slide the pot back into the Hot-air fryer (Fig 4). Noting to carefully align
with the guides in the body of the fryer. Never use the pot without the
basket in it.
Caution: Do not touch the pot during and after use, as it gets very
hot. Only hold the pot by the handle.
5. Determine the required preparation time for the ingredient ( see section
'Settings' in this chapter).
6. Some ingredients require shaking halfway through the preparation time
(see section "Settings" in this chapter). To shake the ingredients, pull the
pot out of the appliance by the handle and shake it. Then slide the pot
back into the air fryer.
Caution: Do not press the button the handle during shaking. (Fig.3)
Tip: If you set the timer to half the preparation time, you hear the
timer buzzer when you have to shake the ingredients. However, this
means that you have to set the timer again to the remaining preparation
time after shaking.
7. When you hear the timer buzzer, the set preparation time has elapsed.
Pull the pot out of the appliance
Note: You can also switch off the appliance manually. To do this, set
the time to 1.
8. Check if the ingredients are ready. If the ingredients are not ready yet,
simply slide the pot back into the appliance and set the timer to a few
extra minutes.
9. To remove ingredients (e.g. fries), pull the pot out of the Hot-air fryer
6
www.oster.com
CKSTAFLC-DM_20ESM2 (US).indd 7-8
and place it on heat resistant surface, and press the basket release
button and lift the basket out of the pan.
Do not turn the basket upside down with the pot still attached
to it, as any excess oil that has collected on the bottom of the
pot will leak onto the ingredients.
The pot and the ingredients are hot. Depending on the type of
the ingredients in the air fryer, steam may escape from the pot.
10. Empty the basket into a bowl or onto a plate.
11. When a batch of ingredients is ready, the Hot-air fryer is instantly ready
for preparing another batch.

CONTROL PANEL INSTRUCTIONS

Control Panel icons will only be visible once the unit is turned on.
OPERATION INSTRUCTIONS:
Key
–Power Key
Once the Basket and pot are properly placed in the main housing, the Power light
will be illuminated. Selecting the power key will set the unit default temperature
(400 ºF), while the cooking time will be set to 15 minutes. Selecting the Power
key a second time will start the cooking process. During cooking, press the power
key once to pause the cooking cycle and twice to resume. Press and hold the
power key for 3 seconds to turn the unit off. The lights will go off and fan will
continue to run until the unit has sufficiently cooled.
Note: The red light in the center of the fan icon indicates that the cooking
cycle is in process, If the fan icon is on without this red light, the fan is
running to cool the unit down.
www.oster.com
7
5/5/20 11:01 AM

Advertisement

Table of Contents
loading

Table of Contents