Advertisement
Quick Links
Advertisement
Summary of Contents for PAL TREO RETRO
- Page 1 PAL TREO RETRO INSTALLATION MANUAL...
-
Page 2: Table Of Contents
CONTENTS PAGE Guides and Warnings Nicheless Installation Connecting Light Connecting to driver Troubleshooting Terms and Conditions GUIDES AND WARNINGS Tools Required: 2 ½” Hole Saw Silicon + caulking gun Thread tape IMPORTANT INFORMATION: 1) Ensure that the electrical system for your pool conforms with all the requirements of the National Electrical Code (NEC) and all relevant local codes and ordinances. - Page 3 NICHE INSTALLATION Install Pentair Globrite Niche as per manufacutrer instructions Concrete 5.1cm (2”) PVC pipe Sch.40 Color Ring Treo Retro (Niche Sleeve) 5.1cm (2”) PVC pipe Sch.40 38cm (15” min) Color Ring Treo Retro 5.1cm (2”) PVC pipe Sch.40 Color Ring...
-
Page 4: Nicheless Installation
GUNITE/CONCRETE NICHELESS INSTALLATION Installation Setup 24VAC Transformer 48” (1.22m) 8” (20.3cm) 18” (46cm) minimum Junction Box or 12 VAC Voltage Transformer to the maximum water level of pool. Wall Fitting: 1.5” (3.81cm) PVC Pipe for Gunite Only 4” min (10.2cm) to top of lens Rigid 1”... - Page 5 NICHELESS INSTALLATION Removing and Installing Light Removing Light Installing Light To install light, position light in Insert tool into slots in light. nicheless fitting. Insert the tool into Twist light anti-clockwise to the slots in light and twist clockwise remove from nicheless fitting into nicheless fitting SOLIDWORKS Educational Product.
-
Page 6: Connecting Light
Swimming pools may or may not be drained completely. If not drained completely, the water level should be lowered below the PAL Treo Retro LED light and all water drained from the wall fitting and conduit. Alternatively the PAL Treo Retro LED light may be removed completely, the conduit purged of all water, and a 1 1/2”... -
Page 7: Connecting To Driver
Wi-Fi module from the board if so equipped. • If the Automation does not turn the PAL lights on or off and there is power to the driver, press the S1 button one time to turn on the PAL Driver. -
Page 8: Troubleshooting
PAL Lighting. PAL Lighting shall not be liable for any loss of profits or any consequential, indirect or special loss, damage or injury of any kind whatsoever arising directly or indirectly from PAL Lighting products. This limitation does not apply to any liability under the Australian or New Zealand consumer legislation.