Advertisement
Quick Links
Product Installation Guide
Cold Drinking Water Filters
Contents
F1T
Chlorine reduction in cold water systems
F2ST
Chlorine reduction in cold water systems plus scale control (up to 300 ppm)
Installation Steps
1
Remove the filter cartridge from filter head section
by twisting the cartridge clockwise and down.
Product code: F1T, F2ST
2
Remove red stoppers from the 'In' and 'Out' ports
of the filter head. Push the collar of each port in
whilst at the same time pulling the red stopper
out.
v20.1.5
Advertisement
Summary of Contents for Hyco F1T
- Page 1 Remove red stoppers from the ‘In’ and ‘Out’ ports by twisting the cartridge clockwise and down. of the filter head. Push the collar of each port in whilst at the same time pulling the red stopper out. Product code: F1T, F2ST v20.1.5...
- Page 2 If you experience a problem with this product you should first contact our service department on 01924 225 200 before taking any further action. Experience has shown that issues can often be resolved without the need to return or uninstall the product. hyco.co.uk 01924 225 200...
Need help?
Do you have a question about the F1T and is the answer not in the manual?
Questions and answers