Advertisement
Before proceeding
Set the VOLUME control to 0.
Set the MUTING switch to m OFF.
Set the REC SELECTOR switch to OFF.
Turn on the power of all components.
Sampling frequency
indicators
If you have connected speakers to the A terminals:
Set the switch to the A position.
After playback is finished:
After turning the volume down turn the power off by pressing the
POWER buiton.
8
Set the switch to the B position.
Set the switch to the A+B position.
For broadcast reception:
Press the TUNER button.
For record playback:
Press the PHONO button.
For CD playback:
Press the CD button.
For auxiliary source playback:
Press the AUX button.
For digital source playback (AM-67 model only):
Press the DIGITAL 1 (OPTICAL), DIGITAL 2 or DIGITAL3
button depending on which digital terminal the component
is connected to.
4
Play back the selected source.
Sampling
frequency
indicators
(AM-67 model only)
The sampling frequency indicators light up during digital
source playback to indicate the source's sampling fre-
quency.
The sampling frequency is an important frequency necess-
ary for digital to analog signal conversion during playback.
The standard sampling frequencies are 48kHz, 44.1kHz
and 32kHz.
* The 44kHz indicator will light up during 44.1kHz samp-
ling frequency source playback.
Advertisement
