INSTRUCTIONS FOR USE
GETTING STARTED
Thank you for purchasing this multifunction measuring instrument,
designed and manufactured in Switzerland. For accurate
measurements, please read the instructions and follow the
precautions for use.
This instrument is designed to help users who find themselves
outdoors, it informs you about the conditions in your environment
in real time. However, it does not make weather forecasts and
cannot replace the advice and warnings of the local weather station.
Weather conditions outside can sometimes change very quickly.
Sunny weather, for example, can turn into a thunderstorm in half an
hour or less. So, you should always observe basic safety rules when
undertaking any outdoor activity.
MAIN FEATURES
Sapphire
bearing
propeller
Battery
indicator
Beaufort
scale
Central ON/OFF
button
Left side
button
©JDC Electronic SA, all rights reserved.
SWITCHING ON
To switch on the instrument, briefly press the central button.
It displays the software version, then the last page read
before switching off (or the first page when using the
SKYWATCH® Pro for the first time). THE PAGES ARE
ORGANISED BY DEFAULT, BUT CAN BE CUSTOMISED.
FUNCTIONS OF THE CENTRAL BUTTON
The central button allows different actions to be taken on the
instrument depending on how long it is pressed.
Press briefly
Press for 1 second
Press for 2 seconds →
Press for 3 seconds →
Press for 4 seconds →
More than 4 seconds →
CUSTOMISE YOUR SKYWATCH EXPERIENCE
The SKYWATCH® Pro gives users the option of choosing the
functions they wish to display. They can choose between
different units for a type of measurement, as well as which
Temperature/
type of measurement they want to appear on which page, and
humidity
modify certain values.
sensor
Set a value
(Press the central button for 1 second)
When this function is selected from the central button, a
Page
cursor appears on the first modifiable value on the page. This
number
selection frame can be moved using the buttons to the left
indicator
and right of the central button.
Press the central button to select the function whose value
you want to change, then use the side buttons to increase or
decrease the value you want to set. If there is no adjustable
3 selectable
functions
value on this page, the "set value" function will be ignored.
Modifying the content of a setup page
(Press the central button for 2 seconds)
Right side
The user can modify each of the 3 areas of the screen. Each
button
value and each unit of measurement can be selected for each
section of the screen.
When the "setup" function is selected, a cursor appears on
the first section visible on the screen. The cursor can be
moved using the side buttons and the central button is used
to select the chosen value.
The right-hand button is used to change the unit of
measurement, while the left-hand button is used to change
the type of measurement.
Pressing the central button confirms the new setting.
→
Switch the instrument on and off
→
Modify a value
Modify page content
Deactivate automatic switch off
Shut down the instrument
Exit the menu
V 1.0 Mars 2024