Velocity VDOT-UB4-6 Manual

STANDARD DETECTOR MOUNTING 6" BASE
ƒ Description
VDOT-UB4-6 Standard Base is a 6 inch mounting base for
Velocity's UL listed detectors that can be fitted with 4 inch
square electrical box. VDOT-UB4-6 can be used as a board to
cover the holes of electrical boxes. The base contains no
electrical circuit so that the base isused as a terminal block.
The base is supplied with 4 terminals that are used depending
on the detector heads. The 12 – 22 AWG field wire can be
connected to the terminals. VDOT-UB4-6 contains a locking
screw to avoid unauthorized removal of detectors.
ƒ Compatible Detector Models
Models
VDOT-PY Addressable Photoelectric Smoke Detector
VDOT-PYH Addressable Multisensory Detector
VDOT-H2 Addressable Heat Detector
VDOT-H2-H Addressable High-temp. Heat Detector
VDOT-DPH Addressable Dual Optical / Heat Detector
Description
NOT TO BE USED FOR INSTALLATION PURPOSES.
Velocity reserves the right to make changes at any time without notice
in prices, colours, materials, components, equipment, specifications and
ƒ Features
• UL Listed Base
• Compatible to Velocity's UL Listed detectors
• Available to cover the mounting holes
• Contains a locking screw for tamper protection
• 4 terminals to be used depending on detectors
• Mounts to 3-1/2" octagonal, 4" octagonal, and 4"
square electrical boxes
ƒ Dimensions
models and also to discontinue models.
Page 1
VDOT-UB4-6
GLT-299-6-7 Rev.0
http://www.velocitydetection.com