Advertisement
Usage Explanation:
Anti-leak oil system
Lever ratio adjustment
dial and screw
Remove the brake oil port screw and use an M5 connector
for bleeding. Warning! Removing the oil reservoir cover
may result in leakage.
When bleeding is required, please set the bite point to the
maximum and pump the brake lever several times to fill
the oil circuit.
Product Name:
Product Type:
Handlebar
clamp screw
Oil port
During handlebar installation ensure the threads are
correctly aligned to avoid any thread stripping.
Fine tune lever reach by hand turning the dial and use a
2mm Allen key to adjust the bite point of the brake pads.
Lewis LHT(Axial Cylinder)
Hydraulic Brake
Tool free lever reach adjustment
Allen key bite point adjustment
Lever ratio adjustment indicator
Advertisement
