Response To Status/Data Presentation - IBM System/360 Field Engineering Manual

Response to Status/Data Presentation
The channel recognizes the completion
of this signal sequence
Ending a sequence at this point will only
occur if operational in was slow in falling
at block 08G3 or if select out was slow in
fa!Hng at black 07F2
The channel processes
the data byte
The byte on bus out must have been -
valid for at least 100 ns prior to the
raising of the out tag
Adjust for chaining as required
No
Assure overlap of the
state of suppress out
and service out
The channel accepts the data or status
122 S/ 360
The byte on bus in need not be valid
after the rise of the out tag
The byte on bus out must have been
valid for
at
least l 00 ns prior to the
raising of the out tag
IBM CONFIDENTIAL