Setup About the product When you connect your product to a supported Axis network camera with the latest firmware version, settings for audio and I/O will appear in the camera's webpage. You can do all the settings described in this manual through the camera's webpage.
Page 5
AXIS TU8003 90 W Connectivity Midspan Setup 3. Select which Action the device should perform when the conditions are met. Note If you make changes to an active rule, you have to restart the rule for the changes to take effect.
AXIS TU8003 90 W Connectivity Midspan Troubleshooting Troubleshooting The midspan does not power up • Verify that the power cable is properly connected. • Remove and re-apply power to the device and check the indicators during power up sequence. •...
AXIS TU8003 90 W Connectivity Midspan Specifications Specifications LED indicators Power LED LED color Behavior Description Power off Green Solid Power on PoE LED LED color Behavior Description No device is connected. Solid A remote device is connected but PoE...
Page 8
AXIS TU8003 90 W Connectivity Midspan Specifications 12 V 12 V for external source Line in Audio IN Line out Audio OUT I/O connector Digital input - For connecting devices that can toggle between an open and closed circuit, for example PIR sensors, door/window contacts, and glass break detectors.