Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for ifi ZeN DAC
- Page 1 ZEN DAC 3 User Manual_Ver1.0 插 ⼊ 接 User Manuals Thank you for purchasing the DAC 3 from the ZEN series. The DAC 3 is a balanced USB-audio DAC amplifier. FEATURES: Supports all high-res music formats up to PCM 768kHz, DSD512, and MQA • 1 / 1 1...
- Page 2 • Equipped with a USB-C input for plug-and-play connectivity • Offers both 6.3mm Single-Ended and 4.4mm Balanced headphone outputs, delivering up to 390mW of power for various headphones and earphones • Features RCA and 4.4mm balanced outputs with variable and fixed volume settings, allowing for seamless connection to your active speakers, preamplifiers, or power amplifiers •...
-
Page 3: Table Of Contents
Contents 1. PowerMatch (High/Low) 2. XBass+ On/Off 3. Analogue volume control 4. Audio Format LED (kHz) 5. Single-Ended 6.35mm output 6. Balanced 4.4mm output 7. Balanced 4.4mm analogue line output 8. Variable/Fixed switch 9. RCA analogue output 10. USB-C audio and power input 11. -
Page 4: Powermatch (High/Low)
High WARNING: Due to the high power of ZEN DAC 3, before changing the PowerMatch setting, always start off at a low volume level so that there is no risk of damage to your headphones, speakers or your hearing. iFi audio is not responsible for any hearing or equipment damage from misuse. -
Page 5: Analogue Volume Control
"Low" to avoid damage your hearing or equipment. WARNING: Due to the high power of the ZEN DAC 3, always start off at a low volume level so that there is no risk of damage to your headphones or your hearing. iFi audio is not responsible for any hearing or equipment damage from misuse. -
Page 6: Single-Ended 6.35Mm Output
Connection for 6.35mm headphones. Please use a 3.5 to 6.35mm unbalanced adaptor for 3.5mm Single-Ended headphones. 6. Balanced 4.4mm output Connect balanced 4.4mm headphones. Tip: As ZEN DAC 3 is balanced, we recommend the 4.4mm output. 6 / 1 1... -
Page 7: Balanced 4.4Mm Analogue Line Output
11. DC 5V Power Supply Connection ZEN DAC 3 is powered by 5 volts, either via the enclosed USB-A to USB-C cable (for connection to laptop or PC) or DC power supply (not included) 7 / 1 1... - Page 8 Tip: For optimal performance, it is recommended to upgrade from being powered by USB-C to being powered by an ultra-low noise power adapter such as the iFi iPower 2 5V or iPower X 5V. Note: For use with PC it is necessary to download drivers.
- Page 9 Balanced 4.4mm ≤200Ω Single-Ended RCA ≤100Ω SNR: Balanced 4.4mm ≥113dB @ 0dBFS Single-Ended RCA ≥113dB @ 0dBFS DNR: Balanced 4.4mm ≥113dB @ 0dBFS Single-Ended RCA ≥113dB @ 0dBFS THD + N: Balanced ≤0.0015% @ 0dBFS Single-Ended ≤0.003% @ 0dBFS Headphone Output Section Headphone Outputs: Balanced 4.4mm...
- Page 10 Balanced >70mW @ 600Ω >300mW @ 32Ω Single-Ended >18mW @ 600Ω >210mW @ 32Ω RMS Output power: Balanced >390mW @ 64Ω Single-Ended >210mW @ 32Ω Output impedance: Balanced ≤1Ω Single-Ended ≤1Ω SNR: Balanced ≥109dB(A) (6.2V) Single-Ended ≥109dB(A) (3.3V) DNR: Balanced ≥109dB(A) (6.2V) Single-Ended ≥109dB(A) (3.3V)
- Page 11 Frequency Response: 5Hz-90kHz (± 3dB) Power supply requirement: USB-C or DC 5V/0.5A (centre +ve) Power consumption: No Signal ~0.5W Max Signal ~2.5W Dimensions: 158 x 115 x 35 mm (6.2" x 4.6" x 1.4") Net Weight: 456 g (1.0 lbs) Limited Warranty: 12 months* *12 months typical or as permitted/required by local reseller laws.