Advertisement
1-A Accessories
1-B Location of Controls
• For extra orders, call 1-800-332-5368,
(5-A)
Base unit
Antenna (1-C)
1-C Settings
• USE ONLY WITH Panasonic AC ADAPTOR PQWATC1461M (Order No.
PQWATC1461M).
•The AC adaptor must remain connected at all times. (It is normal for the
adaptor to feel warm during use.)
•To connect a standard telephone on the same line, see section 5-E.
Install the battery in the handset and
close the handset cover,
locking it into place.
• Please do not put off the tapi
from the battery.
3
Charge the battery for 15 hours.
•See section 5-A for more
details.
•The IN USE/CHARGE
indicator lights.
IN USE/CHARGE Indicator
To select the dialing mode TONE (preset) or PULSE
You can program the dialing mode using the handset near the base
unit. The IN USE Indicator light must be off before programming.
(S (PULSE)
Press 1
AUTO/PROGRAM]
^ ® ^
OR
^ [
AUTO/PROGRAM
1.
® (TONE)
•To cancel during programming, press
fOFFl.
Start again from the
beginning.
For assistance, please call: 1-800-211-PANA(7262)
Advertisement
