Download Print this page

Rear Panel; Front Panel - Denon TU-1500RD Operating Instructions Manual

Hide thumbs Also See for TU-1500RD:

Advertisement

■gpLcuwa
DESIGNATIONS AND FUNCTIONS OF PANEL CONTROLS
FRONT PANEL
REAR PANEL
FRONT PANEL
O ON/STANDBY button
The unit works 2-3 seconds after this switch is turned on.
Whenever the power switch is in the STANDBY state, the
apparatus is still connected on AC line voltage.
Please be sure to unplug the cord when you leave honne
for, say, a vacation.
O REMOTE SENSOR (Remote control sensor)
This sensor receives the infrared light transmitted from the
wireless remote control unit.
For remote control, point the wireless remote control unit
to the sensor.
Some of the functions can be operated with the remote
control units included with DEMON pre-main amplifiers and
AV surround amplifiers.
O IF BAND button
Use this button to select the bandwidth of the FM
intermediate frequency amplifer "WIDE" or "NARROW".
The wide or narrow position is indicated by the
WIDE/NARROW indicator O.
O SHIFT/PTY button
Use this button to select the memory blocks, A (1 to 8), B
(1 to 8), C (1 to 8), D (1 to 8), or E (1 to 8).
For PTY search . use this button to select the program type.
When writing station names, use this button to set the
writing position.
0
MEMORY button
Frequencies and station names can be stored in the
memory. When this button is pressed, the "MEMO" and
"CH" indicator on the display flashes for 10 seconds. Use
the SHIFT/PTY button and the preset channel buttons
during this time to designate the desired preset channel.
0
TUNING/PRESET button
Each press of this button toggles the operation mode of the
TUNING/PRESET control O-
In the TUNING mode, the "TUNING" indication of the
fluorescent display tube is lit. In the PRESET mode, the
"PRESET" indication of the fluorescent display tube is lit.
O TUNING/PRESET control
This
control
is
used
in
conjunction
with
the
TUNING/PRESET button 0.
CAUTION:
1. Whenever the ON/STANDBY button is in the STANDBYposition, the unit is still connected on AC line voltage.
Please be sure to unplug the cord when you leave home for, say, a vacation.
2. Noise may be generated if a near-by television set is on during MW (AM), FM broadcasting reception. The tuner should be used
as far away from a television as possible.
3. Effective period of memory back-up is about a month under normal temperature.
6

Advertisement

loading