Philips MAGNAVOX XS1955 Instructions For Use Manual page 14

How
to Use the Volume Controls
Volume Control
T Tse the Volume control to set the
U TV's volume level on the TV
screen. The Volume level or scale
will be seen each time the VOLUME
buttons (on the TV or remote) are
pressed. (0 being the lowest
,
63
being the highest.)
C
BEGIN")
<^> Press the MENU button on the
remote, then press the CH (+) or (-)
to scroll the on-screen menu until the
word VOLUME appears within the
highlight box.
Press the VOL (+) or (-) buttons
| to adjust the volume level.
<f> Press STATUS/EXIT button to
I clear the screen.
COL TEMP COOL
Al ON
Smart \ i /
H|;"'
Try it out. g
Press the VOL (+) or
(-) buttons. The
VOLUME indicator
should appear at the
bottom of the screen.
When the Volume button is pressed
an on-screen display will appear.
How
to Use the Sound (Stereo/Mono) Control
Stereo/Mono TV Sound
y
our TV can receive broadcast
stereo TV programs. The TV has
both an amplifier and twin speakers
through which the stereo sound can
be heard.
Press the MENU (M) button on
the remote, then the CHANNEL ▲ or
▼ buttons to scroll the on-screen
menu until the word SOUND appears
within the highlight box.
<|> Press the VOLUME (+) or (-)
buttons to set the SOUND control
to STEREO or MONO.
<^> Press the STATUS button on the
I remote control to clear the screen.
AVL
INPUT
ON
TUNER
Smart x j /
Help
Remember, g
if the TV is set to
STEREO but the
current channel is
not broadcasted in
stereo, the sound at
the TV will remain
monaural (mono).
NOTE: The TV's on-screen "STEREO"
indicator appears whenever the TV detects an
incoming stereo signal. Be sure the TV's
STEREO control is also turned "ON" in order
for the stereo sound to be heard through the
TV's twin speaker system.