Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for SnowPro LEDFRE116
- Page 1 LED Fresnel RGBAL DMX ZOOM USER MANUAL LEDFRE116...
-
Page 2: Product Specifications
1 PRODUCT SPECIFICATIONS 1.1 PRODUCT SPECIFICATIONS ♦ Voltage:AC100~240V, 50/60Hz ♦ Max Power:240W ♦ Size:510X285X261mm ♦ Weight: 7.6kg... - Page 3 Do not open the fixture or remove any cover. Refer any service operation not described in this manual to an authorized Show Technology Service Centre...
-
Page 4: Display Panel Operation
Contact your ShowPRO supplier for assistance if you have any questions about how to install this product safely. DISPLAY PANEL OPERATION 3.1 DISPLAY OPERATION ♦ MENU: BACK ♦ ENTER: ENTER OR SAVE ♦ DOWN: DOWN ♦... - Page 5 Back Down Enter • <UP> Scroll 'UP' through the menu list or increase the value of the current function. • <DOWN> Scroll 'DOWN' through the menu list or decrease the value of the current function. • <BACK> Scroll through the main menu or exit current function. •...
- Page 6 3.2 MENU MAP...
-
Page 8: Edit Static Colour
CONTROL KNOB SWITCH SET UP • [Manual mode], press [ENTER], enter the function you wish to use • Press [ENTER], choose [Mode 1 ], order from left to right is [Dimmer] [Zoom] [CCT], choose [Mode order from left to right is [Dimmer] [Zoom] [COLOR], choose [Mode order from left to right is [Hue] [Saturation] [intensity], choose [Mode 4], order from left to right is... -
Page 9: Dmx512 Settings
DMX512 SETTINGS • Enter the [ADDRESS] mode to set the DMX ADDRESS. 3.7 RUN MODE • Enter the [RUN MODE] mode to set working mode. • [DMX] mode is for using the DMX512 controller to control the fixtures. • [SLAVE] mode is for Master - Slave operation. - Page 10 • [SETTING] This menu allows the user to adjust key operation settings for this fixture. • Select [UPLOAD] to upload the custom programs from the current MASTER unit to the SLAVE units. • To reset custom modes to default values, select [RESET]. Note: [UC]/[RGBW]/[CALIB.C] can't reset •...
- Page 11 3.11 BALANCE PARAMETERS AND CORRECTION MENU DISPLAY Press [MENU] button to enter the password confirmation, to enter the correct password <UP+ DOWN+ UP+ DOWN> The correct password will enter show submenu • Use [ CALIB.C] to select different color temperatures. •...
-
Page 12: Using A Dmx512 Controller
4 USING A DMX512 CONTROLLER CHANNEL ASSIGNME NT • Note: This product has four DMX512 channel configurations: [HSIC], [SSP], [TOUR], [TR16]. HSIC CHANNEL VALUE FUNCTION INTENSITY 0 <=>255 0 <=> 255 HUE FINE 0 <=> 255 SATURATION 0 <=> 255 0 <=>... - Page 13 CHANNEL VALUE FUNCTION MASTER DIMMER <=> <=> GREEN <=> BLUE <=> AMBER <=> LIME <=> PRESET COLOR NO FUNCTION <=> L106 <=> <=> <=> L194 <=> <=> L019 <=> <=> <=> <=> L213 <=> R377 <=> L202 <=> L328 <=> <=>...
- Page 14 TOUR CHANNEL VALUE FUNCTION MASTER DIMMER <=> <=> GREEN <=> BLUE <=> AMBER <=> LIME <=> PRESET COLOR <=> NO FUNCTION <=> L106 <=> <=> L194 <=> <=> L019 <=> <=> <=> <=> L213 <=> R377 <=> <=> L202 <=> L328 <=>...
- Page 15 CHANNEL VALUE FUNCTION 1800K <=> 2200K <=> 2700K <=> 3000K <=> 3200K <=> 3500K <=> 4000K <=> 4200K <=> 4500K <=> 5600K <=> 6000K <=> 6500K <=> 7200K <=> <=> 8000K STROBE NO FUNCTION <=> <=> STROBE FROM (SLOW TO FAST, 0-25Hz) 1 00 <=>...
- Page 16 TR16 CHANNEL VALUE FUNCTION MASTER DIMMER <=> MASTER DIMMER FINE <=> <=> <=> RED FINE <=> GREEN <=> GREEN FINE <=> BLUE <=> BLUE FINE <=> AMBER <=> AMBER FINE <=> LIME LIME FINE <=> PRESET COLOR NO FUNCTION <=> L106 <=>...
- Page 17 CHANNEL VALUE FUNCTION RED DOWN / GREEN DOWN / BLUE 100% <=> ALL LED AT FULL OUTPUT <=> 1800K <=> 2200K <=> 2700K <=> 3000K <=> 3200K <=> 3500K <=> 4000K <=> 4200K <=> 4500K <=> 5600K <=> 6000K <=> 6500K <=>...
Need help?
Do you have a question about the LEDFRE116 and is the answer not in the manual?
Questions and answers