Component description Unscrew the air hose counterclockwise Screw the air hose clockwise Light Air hose interface Current tire pressure Mode selected Target tire pressure Battery display Unit display Bar Psi Kpa Kg/cm Hold down on/off Light button, Strobe, press to start/stop Increase tire pressure Decrease...
Page 4
Instructions for use �.Inflating steps � � �.Screw the air hose clockwise �.Connect the air hose to the tire screwing in clockwise � � �.Hold down the power button for �.Short press mode button “ ” to � seconds to turn on toggle between presets - Hold down for �...
Page 5
Please fully charge before using it for the first time. Use the charging cable to connect the �V USB adapter to charge the inflator. One bar: �% - ��% Two bars: ��% - ��% Three bars: ��% - ���% Tips:...
Page 6
�.The use of safty hammer In an emergency, take out the safety hammer from the bottom and screw in where the air hose would be to shatter your window for escape. �.As a power bank This inflator can be used as a �V/�A power bank. �.