Industrial Automation and Enclosures Inc. ERP100DB-6U Installation

ERP100DB-6U 6U DIN Rail Box Installation
Included in this package
(2) PVC Wire Ducts (2) Cover Panels
(1) 6U Main Panel
(2) 6U Ear Brackets
(6) #10-32 x 5/8 Rack
Screws
(6) #12-24 x 5/8 Rack
Screws
Installation Steps
Step 1
Attach the PVC Wire Ducts to the mounting
holes on both the top and bottom rows of the panel
using three M4 screws
M4 Screw
Industrial Automation and Enclosures, Inc. Tel: (516) 997-5050 www.IAenclosures.com
(1) 6U Rear Panel
(28) M4 x 8 Screws
(8)Cable Bushing
Step 2
Affi x the side brackets to the right side of the DIN rail
panel using (4) M4 screws, ensuring not to fully tighten them at
this stage
M4 Screws
Step 3
Affi x the side brackets to the left side of the DIN rail
panel using (4) M4 screws, ensuring not to fully tighten them
at this stage also.
Step 4
Secure the bottom panel by sliding it between the side
brackets. Confi rm that the 'REAR FLANGE' on the cover panel
is oriented towards the back. Align the mounting holes on the
panel's mounting tabs with the M4 PEM Nuts located on the
brackets
Bottom Cover panel
M4 Pem Nuts
REAR FLANGE.
Screw mounting holes